Class 6 Off Road Race Truck D-50 build out. Chevy. 4.3L V6

A place to post a build thread for your 1st Gen truck.
(1979-1986)
Forum rules
Please look carefully at all the Sub Categories and place your question in the most appropriate Sub Category for faster replies. Thank you and enjoy your time here.

Re: Class 6 Off Road Race Truck D-50 build out. Chevy. 4.3L

Postby joey_crandall » Thu Feb 24, 2011 5:39 pm

haha i know where most of these shops are where youve gotten alot of your work done. whens this beast going to run?
always gift wrap your package.
User avatar
joey_crandall
Member
Member
 
Posts: 54
Joined: Fri Nov 06, 2009 10:38 pm
Engine Size: SQ
What year vehicle do you own?: 1986

Re: Class 6 Off Road Race Truck D-50 build out. Chevy. 4.3L

Postby camoit » Thu Feb 24, 2011 10:58 pm

joey_crandall wrote:haha i know where most of these shops are where youve gotten alot of your work done. whens this beast going to run?

Hell I'm shooting for mid summer. Working on the ignition system right now. I need to build the thing up to the point I can start it. Then tear it down to the frame then send it out for blasting and primer. Then paint it. Then put it back together. Fire it then drive it. That makes me think X-Mas. It would be sooner if you came out and gave me a hand.
Here is my BUILD THREAD.
Live Class 6 off road race truck build. CLICK HERE FOR FEED.

http://www.onsiteconcrete.net
User avatar
camoit
Admin
Admin
 
Posts: 565
Joined: Thu Feb 18, 2010 11:22 pm
Location: Sac, Ca.
Engine Size: 2.6L
What year vehicle do you own?: 1980

Re: Class 6 Off Road Race Truck D-50 build out. Chevy. 4.3L

Postby 4doorciv » Mon Feb 28, 2011 2:05 am

Yo camoit. Haven't seen this truck in a while. Wouldn't mind some updated pics. ;)
-Ryan-
1989 mighty max 4g63 turbo. -down-
1995 Eagle talon tsi awd. -daily-
1992 Honda civic b18c1. -sold-
User avatar
4doorciv
VIP
VIP
 
Posts: 540
Joined: Wed Aug 05, 2009 1:14 pm
Location: Honolulu, HI
Engine Size: 4g63
What year vehicle do you own?: 1989

Re: Class 6 Off Road Race Truck D-50 build out. Chevy. 4.3L

Postby camoit » Mon Feb 28, 2011 6:15 pm

Here ya go..
It looks like the atchment feature is broken. I don't know why.




atchment of the same picture.. placed here 3-15-11

dash.jpg
You do not have the required permissions to view the files attached to this post.
Here is my BUILD THREAD.
Live Class 6 off road race truck build. CLICK HERE FOR FEED.

http://www.onsiteconcrete.net
User avatar
camoit
Admin
Admin
 
Posts: 565
Joined: Thu Feb 18, 2010 11:22 pm
Location: Sac, Ca.
Engine Size: 2.6L
What year vehicle do you own?: 1980

Re: Class 6 Off Road Race Truck D-50 build out. Chevy. 4.3L

Postby 4doorciv » Mon Feb 28, 2011 7:06 pm

Looks like you started on wiring up the motor. I don't see a spedo on the cardboard, don't need one?
-Ryan-
1989 mighty max 4g63 turbo. -down-
1995 Eagle talon tsi awd. -daily-
1992 Honda civic b18c1. -sold-
User avatar
4doorciv
VIP
VIP
 
Posts: 540
Joined: Wed Aug 05, 2009 1:14 pm
Location: Honolulu, HI
Engine Size: 4g63
What year vehicle do you own?: 1989

Re: Class 6 Off Road Race Truck D-50 build out. Chevy. 4.3L

Postby camoit » Tue Mar 15, 2011 8:06 pm

Time for a quick update. I got the dash finished up and have started on the electrical.
The dash turned out OK for not having a break. I used 2 chunks of angle iron in a vice. Then pushed very carefully. I used my Di-grinder with a surface prep disk on it to make it shiny, then gave is a clear coat and called it done. Now the gages will cost around $1800.00 to fill all the holes. The gages to be used are. Oil Pressure, Oil Temp, Water Temp, Water Pressure, Volt, Fuel Level, Fuel Pressure, Wide Band Air Fuel Ratio, Tach. and hour meter. Blow is a video of the gages in action from Auto Meter.


Lay Out
Image

The Brake Bias allows me to adjust front to rear bias control on the fly.
Turn the knob to the right = more front braking. To the left = more rear brake.
The Timing control allows for change in fuel Octane and altitude with out having to adjust the Dist. Turn it to the right = More Advance.
The line lock allows for front brake lock up.

Raw Dash
Image


Finished Dash
Image


Image


Image


Image



Here is my BUILD THREAD.
Live Class 6 off road race truck build. CLICK HERE FOR FEED.

http://www.onsiteconcrete.net
User avatar
camoit
Admin
Admin
 
Posts: 565
Joined: Thu Feb 18, 2010 11:22 pm
Location: Sac, Ca.
Engine Size: 2.6L
What year vehicle do you own?: 1980

Re: Class 6 Off Road Race Truck D-50 build out. Chevy. 4.3L

Postby 4doorciv » Tue Mar 15, 2011 9:37 pm

Looks nice. But you aren't going to use a spedometer? Don't wanna get caught speeding on the way to the dirt and mud. Lol.
-Ryan-
1989 mighty max 4g63 turbo. -down-
1995 Eagle talon tsi awd. -daily-
1992 Honda civic b18c1. -sold-
User avatar
4doorciv
VIP
VIP
 
Posts: 540
Joined: Wed Aug 05, 2009 1:14 pm
Location: Honolulu, HI
Engine Size: 4g63
What year vehicle do you own?: 1989

Re: Class 6 Off Road Race Truck D-50 build out. Chevy. 4.3L

Postby Acuta73 » Tue Mar 29, 2011 2:44 am

Love your harness job, working on cleaning mine up. Not exactly a race truck, but being a computer geek, clean wiring is a happy thing!

I want your dash, or more to the point, I want a street version of it. Keeping my heat controls, vents, radio, glove box, etc.. Did you do it yourself or have it done? The vinyl on mine is trash and looks like it. Would love to box mine in with aluminum and drop on some carbon fiber. Would match the seats I have bookmarked nicely and still leave me room for a trucker-friendly instrument cluster (LOVE the passenger side oh-shit handle). Your switch panels are nice, but going with 16mm bulgin/lamptron style vandal switches for my toy. As an everyday driver, I need the space.

Biggest reason I want your dash is to make space for an LCD to display most of my sensor gauges without an individual gauge (most semis have one these days. Includes everything from a clock to OBD reports). Going to use an Arduino micro-controller to set up things like Pyro, fuel/air, Ammeter, etc that I just don't need to see all the time on the street. Was going to lose my rear-view for a switch plate, but your dash box would give me space.

Please post or PM me more about the dash?
User avatar
Acuta73

 
Posts: 9
Joined: Mon Nov 15, 2010 9:38 pm
Engine Size: 2.6L
What year vehicle do you own?: 1986

Re: Class 6 Off Road Race Truck D-50 build out. Chevy. 4.3L

Postby camoit » Tue Mar 29, 2011 8:32 am

Well I'm going to need to start the build thread on the new board. I will take this old one and clean it up. remove the odd stuff and make an article.
Here is my BUILD THREAD.
Live Class 6 off road race truck build. CLICK HERE FOR FEED.

http://www.onsiteconcrete.net
User avatar
camoit
Admin
Admin
 
Posts: 565
Joined: Thu Feb 18, 2010 11:22 pm
Location: Sac, Ca.
Engine Size: 2.6L
What year vehicle do you own?: 1980

Previous

Return to 1st generation


Who is online

Users browsing this forum: No registered users and 0 guests

cron