aluminum radiator

[siris]

I don't have 170 bucks for a new radiator, but I do have a local picknpull brimming with c4c's. Anyone have an idea of cars i should look at for a donor rad? need auto cooling lines, pref on bottom.

[RusTy Max]

I just pulled a radiator with an upper driver side and lower passanger side inlet/outlet. Then just find a hose that will fit the new angle. Bingo. Piece of cake. I know mine is almost twice the size of the stock one.

[LethalEthan]

If you can find one with the inlet and outlets in the right spot you wont have a problem even if you cant just get some aftermarket stainless hoses like I have on mine. The rad I have is made for a 240sx and the inlet and outlet are opposite of what I needed, so I just found some nice long hoses on ebay and ran them across.

[TurboMax]

I believe a Mits. Montero radiator will drop right in and has a thicker core.

[siris]

I was just wondering if someone knows of a rad that will fit pretty well. Like the montero, but i'd like to stay away from copper cored radiators. What did you pull yours out of rusty?

[RusTy Max]

Mine was already in a mighty max at the junk yard... so I'm not sure what it came out of... but if I had to guess I'd say a bigger sedan. Such as a caddy or buick.

[siris]

i guess i'll go scroungin, and report back with my findings.