mightyram50.net

Ok guys I would like to here about what kinda 2.6 heads your running with your webber and what you think would be best or how it runs.
I have heard a few thing just wanted to see .
Here my head if you want to see .

Well this is what I had to do in order to bring my truck back from the dead. http://mightyram50.com/phpBB3/viewtopic.php?f=48&t=1181

Alright lets to a list of Pros and Cons , or just tell me what you like or dislikes about the two heads please .

Jet valves are an emissions piece added to the heads to create a swirl port condition at up to 1/2 throttle for more complete combustion. Once a weber with an adaptor plate is installed, the jet valves are done, with no air flow to them at all. The true advantage to the non jet head is the elimination of the head cracking around the jet valve cartridge. If you have to change the head, use a non jet head; but if your original head is good, use it. For oiling mods for non jet heads go to this site: http://b2600turbo.com/