broken cam bolt

[92slammedmitsu]

hey guys heres the deal I was pulling 2.4 motor recently and a the engine hoist chain I had attached to a bolt on the engine was caught behind the cam gear and it broke the bolt out of the front of the camshaft. So my question is ...Can I use another cam and rocker arms from another head I have ? if so what would I have to do to make it work?

[pennyman1]

Have you tried taking a chisel and try to spin it out? The bolt should come right out as the torque on the bolt is only like 10lbs or so. A bolt for a 2.6 cam is the same.

[92slammedmitsu]

Nevermind I found my answer thanks anyways