mightyram50.net • View topic

by **maxFTW** » Wed Nov 11, 2009 11:39 am

4g63 short block?

by maxFTW » Wed Nov 11, 2009 11:39 am

will these blocks fit up to my manual tranny ? jw wonder found a good deal on one
-thanks

[-]===Ram===[-]
I wouldent hit a lady but i would beat a bitch!!
-89 ram 50 2.0 2wd
-Soon to be 4g63t

by **83L200** » Wed Nov 11, 2009 5:21 pm

Re: 4g63 short block?

by 83L200 » Wed Nov 11, 2009 5:21 pm

you need a gen 1 gear box or a mitsi sigma (not sure wot you call them over there?) note the gear stick is about 2" further back than the gen 1 box, and the drive shaft out put shaft is smaller than the gen 1 box

by **maxFTW** » Wed Nov 11, 2009 6:05 pm

Re: 4g63 short block?

by maxFTW » Wed Nov 11, 2009 6:05 pm

so my tranny wouldn't work then correct? if so then can a 2nd gen motor bolt up?

[-]===Ram===[-]
I wouldent hit a lady but i would beat a bitch!!
-89 ram 50 2.0 2wd
-Soon to be 4g63t

by **83L200** » Wed Nov 11, 2009 6:27 pm

Re: 4g63 short block?

by 83L200 » Wed Nov 11, 2009 6:27 pm

yer people turbo 2.6 motors all the time, they go nuts

by **maxFTW** » Wed Nov 11, 2009 8:47 pm

Re: 4g63 short block?

by maxFTW » Wed Nov 11, 2009 8:47 pm

ya but i got the 2.0 anybody turbo those?

[-]===Ram===[-]
I wouldent hit a lady but i would beat a bitch!!
-89 ram 50 2.0 2wd
-Soon to be 4g63t

by **83L200** » Wed Nov 11, 2009 9:40 pm

Re: 4g63 short block?

by 83L200 » Wed Nov 11, 2009 9:40 pm

if its a 2.0 it should be the same as a 4g63 then your tranny will work

by **maxFTW** » Thu Nov 12, 2009 1:52 pm

Re: 4g63 short block?

by maxFTW » Thu Nov 12, 2009 1:52 pm

ok perfect

[-]===Ram===[-]
I wouldent hit a lady but i would beat a bitch!!
-89 ram 50 2.0 2wd
-Soon to be 4g63t

Who is online