[phpBB Debug] PHP Notice: in file /viewtopic.php on line 1052: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EDT/-4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 1052: getdate() [function.getdate]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EDT/-4.0/DST' instead
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4505: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4507: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4508: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4509: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
mightyram50.net • View topic - stock gearing differences
Page 1 of 1

stock gearing differences

PostPosted: Tue Nov 30, 2010 12:28 pm
by sassafrass
does anyone know the stock gearing differences between the diesel and gas 4x4 rigs. i assume there is some and if so is it in the diffs or in the tranny. in other words is the tranny the same (besides the hyr clutch control) and the gearing in the diffs or are the diffs the same and the gearing in the tranny is different.
thanks,
tom

Re: stock gearing differences

PostPosted: Thu Dec 02, 2010 1:36 pm
by DroppedMitsu
These trucks came with a few dif gears for the differential. most came with 3.909, some with ~3.54 and some with ~4.xx

Re: stock gearing differences

PostPosted: Fri Dec 03, 2010 8:31 am
by pennyman1
4.22 and 4.625 - Most are in the 2nd gen 9" rears of monteros, although some 3.0 V6 trucks had 4.22s in them. The 1 ton trucks also had 4.22s, but i'm not sure if they are 8 or 9" rear gears. Some vans also had 4.22s in an 8" gear.

Re: stock gearing differences

PostPosted: Sun Dec 05, 2010 10:11 am
by sassafrass
ok, so you guys are saying the tranny is the same and the difference is in the diffs. the tranny in my gas truck is in much better shape, and i have to pull the engine/tranny to get to the rear seal on the diesel.

thanks,
tom

Re: stock gearing differences

PostPosted: Sun Dec 05, 2010 5:09 pm
by pennyman1
Yes the trannies are the same. Just remember to change the speedo gear to match the rear gears.

Re: stock gearing differences

PostPosted: Sun Dec 05, 2010 5:27 pm
by sassafrass
oh, thanks forgot about that. i was thinking i only had to do the hydraulic clutch....

maybe next week i will get to it...

tom

Re: stock gearing differences

PostPosted: Sun Dec 05, 2010 5:38 pm
by pennyman1
I changed a tranny once in my 85 with one from an 84 without the speedo gear change - it was 15 mph off low, 55 was really 70. Had to go to the dealer to get the right gear, tranny was scrapped by the garage before i realized the speedo gear was wrong. I now do my own tranny changes, so the parts don't get tossed.