[phpBB Debug] PHP Notice: in file /viewtopic.php on line 1052: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EDT/-4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 1052: getdate() [function.getdate]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EDT/-4.0/DST' instead
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4505: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4507: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4508: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4509: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
mightyram50.net • View topic - Balance shaft (silent shaft)

mightyram50.net

A site for Mitsubishi Mighty Max and Dodge Ram 50 Enthusiasts.
http://mightyram50.net/phpBB3/

Balance shaft (silent shaft)

http://mightyram50.net/phpBB3/viewtopic.php?f=110&t=1378

Page 1 of 1

Balance shaft (silent shaft)

PostPosted: Sat Jul 24, 2010 3:00 am
by Bryce4812
Hi, i just recently purchased a 1985 mitsubishi mighty max with the 4d55t in it. I bought the truck as a non runner and it has 155,000 miles on it. When i took the front timing cover off i noticed that the balance shaft belt tensioner had failed. This made me decide to look over the bottom end. I was able to download a manual over the internet but it doesnt give me certain measurements. I was wondering if anyone has the MIC specs for the balance shaft? I want to make sure everything is within spec before i reassemble. Also does anyone know what normal oil pressure is at idle in psi? I came to find out later after i bought the truck that the oil pressure was at 5 psi for awhile at idle when it did run. Could the balance shaft belt being broken cause this? Thank you for your help

Re: Balance shaft (silent shaft)

PostPosted: Sat Jul 24, 2010 8:01 am
by mikewarme
Believe me overhaul the motor. The belt has ZERO to do with it. Take it apart for evaluation. Im going away for the weekend contact me after Monday if you want to talk. 818 268 3012 I do these all the time as a Hobby
All times are UTC - 8 hours
Page 1 of 1
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/