88 2.0L Idle Problem

Re: 88 2.0L Idle Problem

Postby GotToGo » Wed Jan 12, 2011 1:32 pm

So which is the reed valve, #1 or #2?

Exhaust Valve3.jpg
You do not have the required permissions to view the files attached to this post.
User avatar
GotToGo
Member
Member
 
Posts: 26
Joined: Mon Nov 08, 2010 5:03 pm
Engine Size: 2.0L
What year vehicle do you own?: 1988

Re: 88 2.0L Idle Problem

Postby camoit » Wed Jan 12, 2011 2:59 pm

#1 is the valve. The first gen uses a simpler system. You can always test by pluging the rubber line that goes to the air cleaner. Pull the thing off and cap the end that goes to the valve. See how she runs then.
Here is my BUILD THREAD.
Live Class 6 off road race truck build. CLICK HERE FOR FEED.

http://www.onsiteconcrete.net
User avatar
camoit
Admin
Admin
 
Posts: 565
Joined: Thu Feb 18, 2010 11:22 pm
Location: Sac, Ca.
Engine Size: 2.6L
What year vehicle do you own?: 1980

Re: 88 2.0L Idle Problem

Postby pennyman1 » Fri Jan 14, 2011 7:28 pm

it is a air injection valve that goes from the air cleaner into the exhaust maniford to dilute the exhaust before the second cat. If it sticks open it causes a massive exhaust leak. If you don't have to deal with emissions, remove it and plug the fitting in the exhaust manifold.
Pennyman1
Living the D-50 life since 1980
The best Dodge that Dodge never made
User avatar
pennyman1
VIP
VIP
 
Posts: 541
Joined: Thu Apr 30, 2009 10:30 am
Location: Pittsburgh, PA

Re: 88 2.0L Idle Problem

Postby GotToGo » Sun Jan 16, 2011 9:56 am

I do have emissions here so I guess the unit stays.

I have checked the valve using another vacuum source and it seems to be working fine. I also tried plugging the tube and while there is a small effect on the idle, it doesn't cure my idle surging.

I'm back to square one.
User avatar
GotToGo
Member
Member
 
Posts: 26
Joined: Mon Nov 08, 2010 5:03 pm
Engine Size: 2.0L
What year vehicle do you own?: 1988

Re: 88 2.0L Idle Problem

Postby DroppedMitsu » Sun Jan 16, 2011 10:27 am

If u have an idle surge its most likely a problem in the carb somewhere, where at I don't know but most of the time its somethin in the carb causing it.
-Josh-
1987 Mighty Max with 4g63 Turbo swap
1989 Macrocab Mighty Max
DroppedMitsu
VIP
VIP
 
Posts: 194
Joined: Sat May 09, 2009 11:34 am
Location: Vacaville, CA (Nor-Cal)
Engine Size: 4g63
What year vehicle do you own?: 1987

Re: 88 2.0L Idle Problem

Postby pennyman1 » Sun Jan 16, 2011 3:07 pm

Did you check all the vacuum lines to the control box on the fender by the carb. Mice like to crawl in there and eat the tubing where you can't see it. The tubing may also be cracked from age
Pennyman1
Living the D-50 life since 1980
The best Dodge that Dodge never made
User avatar
pennyman1
VIP
VIP
 
Posts: 541
Joined: Thu Apr 30, 2009 10:30 am
Location: Pittsburgh, PA

Re: 88 2.0L Idle Problem

Postby GotToGo » Mon Jan 17, 2011 2:46 pm

First, I installed a Weber and the same problem occurred, although not as severely. But I think that would indicate it's not a carb problem.

Second, I have checked every inch of vacuum hose and can find no leaks. I also checked the intake manifold for leaks and found none.

I'm stumped, that's why I came here. :)

I know it appears to be a leak but the way it initially came and went makes me think it's a switch or something that finally gave out. But I'm just guessing.

Any other ideas?
User avatar
GotToGo
Member
Member
 
Posts: 26
Joined: Mon Nov 08, 2010 5:03 pm
Engine Size: 2.0L
What year vehicle do you own?: 1988

Re: 88 2.0L Idle Problem

Postby GotToGo » Thu Jan 20, 2011 3:57 pm

Anyone?

Anyone?

Beuller?
User avatar
GotToGo
Member
Member
 
Posts: 26
Joined: Mon Nov 08, 2010 5:03 pm
Engine Size: 2.0L
What year vehicle do you own?: 1988

Re: 88 2.0L Idle Problem

Postby GotToGo » Tue Apr 12, 2011 12:18 pm

If anyone is interested, I finally found the issue.

It was a leak at the intake manifold gasket.

Apparently I wasn't diligent enough when testing for leaks. I replaced the gasket and used a little ht sealer and it's running fine again.
User avatar
GotToGo
Member
Member
 
Posts: 26
Joined: Mon Nov 08, 2010 5:03 pm
Engine Size: 2.0L
What year vehicle do you own?: 1988

Previous

Return to General Questions.


Who is online

Users browsing this forum: No registered users and 2 guests

cron