got valve timing right and swapped carb to a non fbc solex

[86powerram50]

ive tried pourin gas down the carb but its not helpin

[86powerram50]

i asked a good mechanic friend of mine and he seems to think it has a intake manifold leak

[86powerram50]

figured it out i have a couple either burnt or bent valves

[dmr8x2]

i am guessing you have a 2.6L
i take it you just did a compression test
these moters do not have 0 clearance heads
meaning pistons don't bend valves
are you sure Dissy is set to TDS on compresion stroke
and if you still have jet valvs that none are stuck open

[86powerram50]

the distributor is not a problem but it barely has any compression even though the rings are brand new. and it has the jet valve eliminator kit. im stumped now on this truck

[86powerram50]

i just cant get it to start at all and i have no clue why it has spark, fuel ,compression but the number one plug is the only one that fouls out

[86powerram50]

i have 3 bent intake valves

[laidoutmits]

so now u figured it out, did those valves fix it?

[86powerram50]

yep its runnin and i have a new weber 34dgev carb on it