coil over springs

[villacorta32]

anyone know if there are any out there for the mm or if there are any we could use on the truck?

[LethalEthan]

I could go on for days about building a coilover setup on a minitruck. But as for easiest you could go with a shock type coilover like a QA1. They make them for old hot rods that mount just the same as a normal shock absorber does. You would still have to have some sort of locating device for the rear but you could just leave the leaf springs on for that i suppose.

[villacorta32]

im just trying to do coil overs for the front for right now, would the qa1 work for the front

[LethalEthan]

your best bet would be to try and see if any of these will fit

http://qa1.thomasnet.com/viewitems/moto ... &forward=1

you can get the springs from that site also. They are a bit pricey but these are great shocks and they have adjustable ride height of course.

youll also need something like this http://qa1.thomasnet.com/item/motorspor ... &forward=1

check on these as well
http://qa1.thomasnet.com/viewitems/spor ... &forward=1

they have alot of great stuff on their site and im sure you can find what your looking for there.

[villacorta32]

thanks E

[villacorta32]

also my tie rod bushing are shot to hell, wut should I do?

[pennyman1]

Do you mean strut rod bushings or tie rod boots?

[villacorta32]

strut rod my bad, I think the two rods that run kinda like this toward the front /\

[pennyman1]

Go to this site, they have all the urethane bushings including the strut rods:http://www.suspension.com/Dodge%20Dakota.html . Don't let the name fool you they ahave the d50 bushings also