mightyram50.net

anyone know if there are any out there for the mm or if there are any we could use on the truck?

I could go on for days about building a coilover setup on a minitruck. But as for easiest you could go with a shock type coilover like a QA1. They make them for old hot rods that mount just the same as a normal shock absorber does. You would still have to have some sort of locating device for the rear but you could just leave the leaf springs on for that i suppose.

im just trying to do coil overs for the front for right now, would the qa1 work for the front

your best bet would be to try and see if any of these will fit

http://qa1.thomasnet.com/viewitems/moto ... &forward=1

you can get the springs from that site also. They are a bit pricey but these are great shocks and they have adjustable ride height of course.

youll also need something like this http://qa1.thomasnet.com/item/motorspor ... &forward=1

check on these as well
http://qa1.thomasnet.com/viewitems/spor ... &forward=1

they have alot of great stuff on their site and im sure you can find what your looking for there.

thanks E

also my tie rod bushing are shot to hell, wut should I do?

Do you mean strut rod bushings or tie rod boots?

strut rod my bad, I think the two rods that run kinda like this toward the front /\

Go to this site, they have all the urethane bushings including the strut rods:http://www.suspension.com/Dodge%20Dakota.html . Don't let the name fool you they ahave the d50 bushings also