by pennyman1 » Wed Mar 31, 2010 12:40 pm
These truck use a 6x5.5" lug pattern that is a large center hole. It is the same as pre87 GM full size pickups and older toyota 4wd trucks. The ford wheells are 6x135mm, and are a hubcentric design; 6x5.5 is 6x139.7. Many people on here get the 88 and up GM truck wheels and have the centers bored out to fit or grind off the tabs on the front hubs and turn down the rear axle hubs. Those wheels also require a "bulged" lugnut to properly center on the axle. Hope this helps.
Pennyman1
Living the D-50 life since 1980
The best Dodge that Dodge never made