1987 Mitsi L200 2.0

[paullen]

Cheers. It'll be getting repainted next year after all the mechanical bits are done.

[laidoutmits]

That FTO was sweet!!!! Did you have the msd coil and then added the msd controler? Or did u put it all on at the same time? I'm surprised that carb isn't to big, I've got a 32/36 on my 2.0 and not sure if it is to much gas or not.

[paullen]

I fitted the two together and the carb is too big, it runs too rich, but I can't afford to swap it now. I still get a nasty hesitation when pulling away at low revs. I wish I'd gone for a 32/36!

The trucks being a pain in the ass at the mo, struggling to get it into first gear and second is stiff.

[pennyman1]

Change out the gear oil from conventional to synthetic. My 1980 was the same way before I changed it, now I have to be careful on downshifts because it will go into 1st real easy; the steering wheel hurts when you bounce off of it,lol.

[paullen]

I shall try that then

[laidoutmits]

If that doesn't work it sounds like it could be the syncro's

[paullen]

New oil didn't help and its got worse very quickly

I have found a cheap Starion, but don't think I have the cash for a conversion, or a gearbox rebuild.

[laidoutmits]

I've looked in to a rebuitld kit here and it was $176 but that was about a year ago