mightyram50.net

Thinking about putting a trailer hitch on my '88 Mighty Max (2.0l RWD). The only one I could find online is a class 3 from U-Haul for $175. Are there any others out there? Is it bolt-on or is there hole-drilling involved (I don't mind)? The idea here is to tow a 5x8 flat trailer with a 4-wheeler (400#) on it, plus another similar 4-wheeler in the bed.

Thanks in advance.
-Victor

Anyone? I know someone has put a hitch on his/her truck.

My Dad had an 88 sportcab ram50 he put a class3 receiver hitch on - bolted right where the bumper bolted on. Good thing he did that - it became the rear crossmember when the spare tire carrier rotted so bad it all but fell off. You can also find the hitch on ebay.

nukefission wrote:Anyone? I know someone has put a hitch on his/her truck.

Just curious, our trucks weigh 1200lbs and have a 80hp engine. What are you plan on towing?

Thought they were rated higher then 80hp. Maybe at the wheel it's 80.

Josh2g wrote:Just curious, our trucks weigh 1200lbs and have a 80hp engine. What are you plan on towing?

more like 2400lbs

stock hp??

weight between 2500 - 3000lbs

2.0 = 93hp
2.6 = 105hp
2.4 = 116hp
3.0 = 142hp

according to this site http://wikicars.org/en/Dodge_Ram_50

my 2.6T about 188hp

TurboMax wrote:weight between 2500 - 3000lbs

2.0 = 93hp
2.6 = 105hp
2.4 = 116hp
3.0 = 142hp

according to this site http://wikicars.org/en/Dodge_Ram_50

my 2.6T about 188hp

Damn you guys are splitting hairs, even with those numbers what could you tow? An ATV or a Jonboat maybe.

quick google search shows towing capacity at 2000lbs for the 2.4 I4 and 3500lbs for the 3.0V6 for 1990+ models

It's all about the gearing I guess.