Page 1 of 1

Newbie Questions

PostPosted: Mon Apr 12, 2010 10:19 pm
by 1985ram50royal
Picked up an 85 Ram50 Royal last month (with only 76K original miles), and have quickly developed a much deeper appreciation for diesels. The forums here have been such a great help, so thanks to all that post. The truck is great, and will be a project over the next couple years restoring it. A new fuel filter, glow plugs, alternator, fuel lines, tires, and she is feeling better. Still want to get the engine tweaked a bit more (elephant hose mod and Gallium mods coming next), and then onto suspension and brakes.

Ok, onto my questions-

Anyone run biodiesel on the 2.3L 4D55 engine? If so, did you install a throwaway fuel filter inline before the main filter in the engine compartment? I know the BD will knock a bunch of stuff loose, but given the mileage I am hoping that it won't do too many bad things, thoughts? already ran vitron in place of the rubber lines. I am assuming a little hit on the power side but anyone have any experience with it on this engine?

I'd like to check and set the fuel pump timing, I know I need the pre-stroke adapter, anyone know where I can find one (plus a gauge that would fit)? the internets has not been my friend on this one.

thanks a bunch

george

Re: Newbie Questions

PostPosted: Tue Apr 13, 2010 10:37 am
by TotallyBalistic
like to take the opportunity to welcome you to the site. im very sure the diesel gurus of the forum will chime in pretty quick with some help for ya. we only have a handful of diesel guys here but they are very knowledgeable, glad to see another diesel on the site. hope you enjoy

Re: Newbie Questions

PostPosted: Wed Apr 14, 2010 11:10 am
by mikewarme
Ebay for the prestroke adapter. Same tool as Volkswagons. Also yes use a pre-filter and change fuel hoses to bio-diesel friendly type. Let me know on restoration parts. I have all the weatherstripping etc. No china stuff, only OEM parts