Page 1 of 1
Turbo
Posted:
Wed Jan 20, 2010 8:41 amby shield88mm
I am looking to add a turbo to my stock 88 MM 2.0
Are there any donor vehicles that could provide a bolt on solution?
Has anyone done this?
Re: Turbo
Posted:
Wed Jan 20, 2010 9:48 amby mackmitsubishi
there is not 2.0 bolt on turbo except the conquest/starion 2.0 SOHC motors but that was only available in OZ or new zeland.
Now one possible swap may be from a Mitsubishi cordia 1.8.. Its a smaller displacement and its in a FWD configuration but it should be bolt on. depending on where you are i know of one cordia turbo in PA that has the entire engine.
Re: Turbo
Posted:
Wed Jan 20, 2010 10:41 pmby 83L200
4g63t
Re: Turbo
Posted:
Thu Jan 21, 2010 7:06 amby netstat
I thought there was some semi-serious changes that had to be made to fit the 4G63T
Re: Turbo
Posted:
Thu Jan 21, 2010 4:14 pmby Spicoli
Thermostat housing the big deal.
Re: Turbo
Posted:
Thu Jan 21, 2010 10:39 pmby 83L200
not serious changes there is a few minor ones but its worth it.
Re: Turbo
Posted:
Fri Jan 22, 2010 2:44 pmby crvtec90
I know a guy who made his own manifold to boost his 2.4. It worked well for a while but eventually it would not hold boost pressure. He had finally narrowed it down to the shaft seal for the throttle plate. It was pushing 8-10 pounds I think. He tried changing out the throttle body nuerous times but no fix.