[phpBB Debug] PHP Notice: in file /viewtopic.php on line 1052: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EDT/-4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 1052: getdate() [function.getdate]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EDT/-4.0/DST' instead
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4505: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4507: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4508: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4509: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
mightyram50.net • View topic - Door Panel

mightyram50.net

A site for Mitsubishi Mighty Max and Dodge Ram 50 Enthusiasts.
http://mightyram50.net/phpBB3/

Door Panel

http://mightyram50.net/phpBB3/viewtopic.php?f=97&t=2031

Page 1 of 1

Door Panel

PostPosted: Fri Jan 14, 2011 8:34 am
by Robert
Can some one help me with how to take the door panel off of my 89 Ram 50? I've gotten as far as popping it out, But I can't get that silver trim out that is between the inner part of the window and the inside of the door panel, I don't want to break it so how do you take it off?

Re: Door Panel

PostPosted: Fri Jan 14, 2011 9:26 am
by 94mitz
i think theres like 4 or 5 clips holding it on. I just flipped the door panel up and pulled on it firmly with one hand on each side of the door panel and mine came off

Re: Door Panel

PostPosted: Fri Jan 14, 2011 9:47 am
by Johnboy72
I'll try to get some info for ya. But yeah, it was originally designed to just pull out.

Re: Door Panel

PostPosted: Fri Jan 14, 2011 11:36 am
by Robert
Ok thanks

Re: Door Panel

PostPosted: Fri Jan 14, 2011 10:02 pm
by Robert
Hey 94mitz, were you able to put it back in place easily?

Re: Door Panel

PostPosted: Sat Jan 15, 2011 6:13 am
by mikewarme
Robert, Like 94 said..... Except I recommend having help to hold it so it doesn't tear due to age.


Roll window down all the way

Flip door panel up

Than apply pressure to back of window scraper. (Maybe use a small Flap screwdriver to get behind.)It pops off with about 6 clips. Note the clips are part of the scraper and stay on the scraper. They don't come loose.

To install reverse procedure

Re: Door Panel

PostPosted: Sat Jan 15, 2011 10:26 am
by Robert
Alright, I wil try that and get back to you guys, thanks for the help
All times are UTC - 8 hours
Page 1 of 1
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/