by Alan » Sat May 29, 2010 6:27 am
What year model truck do you have? If it is 1987-95 there are four screws, one just inside the glove box and three along the top edge of the bezel. Also, the bezel has raised plastic edges that hold the bezel in at the top and bottom. You will have to slide a thin screwdriver in between the top of the bezel and the dashpad to release these plastic edges. I have used a craftsman gasket scraper because it has a wide thin blade. There are two at the top and at the bottom if I remember correctly. Undo the bottom first to make it easier. Hope this helps.