they said a girl cant do it...93 Mighty max body dropped and bagged build up

[LoBeauty]

The is the start of a wonderful build up of my 93 mighty max.. posting lots of pics... ready set go!
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0090.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0063.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0126.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0128.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0125.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0124.jpg

Some interior pics before and......
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0107-1.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0104-1.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0131.jpg

and after so far =) This is the first upholstering I have done... dont judge me lol
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0154.jpg

[LoBeauty]

Here is work being done today =)

http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0152.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0156.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0155.jpg

[Payrion]

that truck will be sic laying on the ground!!!!I had zebra in my last truck(s10)...
what is the rear suspension plans? 2,3,or 4 link? what are your gas tank plans? keeping in stock, moving to rear, or fuel cell?

[Sergio T]

Wow! That's awesome. I wish I had a tenth of your talent. Can't wait to see more.

[camoit]

One thing about these trucks is they cam with a boxed frame. Thats the only reason they hold up so well.

[parrell456]

I like what you did with the rear, it's like the bizzarro Scarlett!

-RHP

[LoBeauty]

I jsut ordered the 4 link and it should be here sometime this week so that we can finish bagging the rear. Gas tank is going all the way to the rear and infront will be the 7 gallon air tank

[LoBeauty]

Here is more work that got done this weekend.. I am not going to take all the credit lol my man helps =)
Ready for the 4 link very soon. The club guys are coming over this weekend to do the body drop of the cab because its the most work.. More pics to come tomorrow =)


http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0160.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0161.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0162.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0164.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0165.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0167.jpg

[Payrion]

is your truck an auto or stick? what are your plans for raising the transmission cross member? ive been kicking ideas around for mine and would like to see what others are doing.

[LoBeauty]

My truck is a stick and the crossmembers are going to be built from scratch.

[LoBeauty]

The bench seat is done =) This is my first reupholstering project..I will get better the more that I do
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0172.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0170.jpg

[tj mightymax]

nice work on the seats i want to do mine but red and black!!!!!!

[Acuta73]

Nice work! I certainly wouldn't be apologizing for it! I get to learn a little of that craft soon, too. Need to do headliner, door panels, and the panel on the back of the cab behind the seat (no earthly clue what that would be called...).

[DroppedMitsu]

Looks damn good, especially for your first time. I need to do the exact same thing, but going with a more plain look most likely.

[LoBeauty]

I am doing the door panels next and they will have a design formed into the panel. I am also doing the headliner and it will have the same zebra print going up th middle of the headliner as well to follow the theme. Thanks for the compliments =)

[LoBeauty]

Ok today we got my gas tank brackets done and part of the air tank brackets started. Also figured a spot to mount the compressors, but to do that were gonna move the rear most bed mounts back about 6". The compressors will mount on the outside of the frame and need to come back where the factory bed mount is to clear a 20" rim and tire combo. Now for the pics
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0186.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0187.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0188.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0190.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0189.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0191.jpg

[LoBeauty]

Here is more progress done on the mighty max since today =) Got alot done and tomorrow body dropping the cab
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0193.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0194.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0195.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0233.jpg
Made these to mount my compressors
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0197.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0201.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0198.jpg

Inside of cab gutted for cab body drop tomorrow
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0234.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0235.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0237.jpg

[LoBeauty]

Did the body drop today ..sittin on rocker and 2 1/4 body drop =) Enjoy =)
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0241.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0242.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0243.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0244.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0245.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0246.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0247.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0248.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0250.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0251.jpg

[l.k.]

...........

[camoit]

OK,,, So who are the guys on ether side of the truck? They look cold. And who is taking the pictures? We like action shots.
But it looks like it is coming along.

[LoBeauty]

The one on the left with the huge goatee is a club member lol and the guy on the right is my boyfriend. Him and his friend did the cutting because he said that it was a little difficult so I took some pictures and worked on the back half with the grinder and welded some. Currently I am waiting for the 4 link from LRD and my drop spindles. Today we are working on the cross members and welding the cab back together. I will take more pics =)

[camoit]

What club, a truck / car / drinking club? Why not get them on here??? I bet we could accommodate them with out a problem. We would love to have them. If there is enough of them I could set them up with there own section somewhere. There's plenty of room.

[LoBeauty]

I havent updated in a couple of weeks but the rear suspension is done and the bag mounts are being placed today =) The 4 link and other misc parts are going to the powdercoater this week. Here is some pics.. Also I am putting 20's on the truck and I am wanting to get rid of the 18" infinitis that you see in the pics. The drop spindle arrives monday and we will be zing the front this weekend ..Enjoy the pics
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0293.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0294.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0295.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0296.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0298.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0299.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0301.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0322.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0323.jpg

[LoBeauty]

Sorry Camoit I thought I replied.. I am in a truck club s.i.c =)

[camoit]

Well if they need a home you can direct them over to here. If there is enough of them I could set them up with there own section.

[LoBeauty]

<<<<< EDIT >>>>>
You Must be a DONATOR to sell parts on the site.
Please refer to this post for more information.

http://www.mightyram50.net/vbulletin/showthread.php/76-Donations-Made-and-what-you-get-by-becoming-a-donator

http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0325.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0326.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0328.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0330.jpg

[LoBeauty]

Here is some pics of the setup in the rear with the 4 link together
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0332.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0333.jpg

[LethalEthan]

Running the exhaust through the cross member like that is awesome, great work! Those are nice wheels too I have one of them on my isuzu.

[Payrion]

is your muffler under the cab? or ya going without? Mine is under the bed but i think im moving it to the cab underside...this looks great..keep going..

[LoBeauty]

Payrion: We want it to be as quite as possible in the cab so at this point I am unsure where its going..I think it going in the rear =)
LethalEthan: Thanks it took a while to drill threw the steel and we friedone of my drills .. smoking and everything lol..

[Fordubishi]

the muffler will be fine either way as long as the exhaust dumps outside the body not under the a floor. My first build I just dumped the exhaust after the muffler and at 60-70mph in OD the thing droned like a Mo-Fo under the bed so bad I had to take it out of OD after 10 minutes of driving.My current build the exhaust will dump out the sides of the box just in front of the rear wheels.The mufflers are under the cab floor and are Dynomax Ultra flows and all I hear is the exhaust at the tips.

2685 2686

[camoit]

You Must be a DONATOR to sell parts on the site.
Please refer to this post for more information.

People-banned-for-one-reason-or-another (http://www.mightyram50.net/vbulletin/showthread.php/624-People-banned-for-one-reason-or-another)
(http://www.mightyram50.net/vbulletin/showthread.php/624-People-banned-for-one-reason-or-another)Donations-Made-and-what-you-get-by-becoming-a-donator (http://www.mightyram50.net/vbulletin/showthread.php/76-Donations-Made-and-what-you-get-by-becoming-a-donator)

[LethalEthan]

Yep, i've burned up a drill like that before. Frames dont like it when you try to put holes in them.

[LoBeauty]

Yeh no kidding Lethal =) Tomorrow I am off to replace my mans drill..

[LoBeauty]

Thanks for the information camoit =)

[LoBeauty]

Ohhhh yeah... DROP SPINDLES are HERE =) Time to put those bad boys in

[parrell456]

Wow those wheels are REALLY nice! This truck is going to be so boss, can't wait to see the drop spindles on! Great, great stuff!

-RHP

[camoit]

Thanks for the information camoit =)
Don't take it personal.
Donators are like drug dealers. They made the rule, then paid off the cops. You can always join them. We have several ways.
The best is to Upgrade your account by becoming a donator and receive a free Decal.
With all donations of $15.00 you will receive a Small Decal.
For a Donation of $25.00 and up you receive a Large Decal.

http://www.mightyram50.net/vbulletin/showthread.php/878-Decals-And-Official-Merchandise-from-MightyRam50-net

We are all waiting for Scarlett to be fitted with one of the 2 he received.

[crvtec90]

Yeah ..,my exhaust exits under the bed instead of out from underneath the truck. It gets a ill annoying. Its actually louder riding in the cab then if u stood next to it.

[laidoutmits]

Workin on a body drop right now myself and tryin to decide were to cut on the fire wall at. What made you choose were you did? Had you seen someone else do it right there? Is there ganna be a space issue with the brake booster? Your interior is great for your first time!!! Project is lookin good to. For my tranny cross member I cut the nuts of the back and used a 1/8" or 3/16 in plate with bolts weled flush then just welded 1 1/2' square to it and used stock mounting bracket, then just tighten the nuts down on top of mounts almost like stock but not welded on. Good luck, and keep up the good thjread!

[LoBeauty]

The firewall was planned by staring at it for about an hour or so and figured the cuts we made were the best spot for when the cab fell the sheetmetal would line up the best. As for the steering and brake booster part buy cutting it where we did the booster stayed in the same location as did the steering box hole. Also kept the gas pedal mounts and almost everything important on the drivers side stayed where it needed. However with z'ing the frame for the engine craddle the steering box hole will have to move up the amount of the z but I'll still have space between that and the brake booster. Thats a good idea for the trans member but sense I have to drop the motor the reverse about of the z for the stock hood clearance I'm just gonna fab up an entirely new trans crossmember. I already have the steel for it in the garage.

[LoBeauty]

Here is more pics of progress
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0342.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0340.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0339.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0346.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0345.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0344.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0343.jpg

The frame is 12" from the ground and can fit a 27" tire
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0341.jpg

[camoit]

Yeah ..,my exhaust exits under the bed instead of out from underneath the truck. It gets a ill annoying. Its actually louder riding in the cab then if u stood next to it.

That was how it was in the camo truck. The best description I can give you is that it's just like flying in a Cessna. :)

[LoBeauty]

What is the easiest way off dropping or lowering the engine a 1.5"? Also what is the easiest way to z the frame an all this with the body still on the frame and the engine in place? Should we just pull the motor and tranny to do all this? Does anyone have a picture or a link thread that could help?

[crvtec90]

What is the easiest way off dropping or lowering the engine a 1.5"? Also what is the easiest way to z the frame an all this with the body still on the frame and the engine in place? Should we just pull the motor and tranny to do all this? Does anyone have a picture or a link thread that could help?

minitruckin magazine did a mighty max project truck..... i dont think a girl did it.......but im not gonna say a girl cant do it...; lol

[laidoutmits]

I've z mine and have pics but I need a minute to find what file/location there in to share. Yes pull the motor and trany. By z-ing it u raise the motor and can cut the motor mounts off and lower them. I'm lowering mine bout 5/8 but also notched and reinforced the crossmeber. Here is my custom compared to stock.http://i889.photobucket.com/albums/ac92/laidoutmits/white%20mits%20project/DSC03731.jpg

[camoit]

You could always use spacers between the trany X member and frame. Some DOM tubing and longer bolts.

[LoBeauty]

Alright more work has been completed =) Enjoy!
Pulled out the motor and tranny for zing the frame
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0382.jpg
Nice and clean now =)
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0383.jpg
Tank, compressors and valves mounted
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0378.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0377.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0376.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0375.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0374.jpg

Sealed the cab except for the steering column
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0381.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0380.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0379.jpg

[LoBeauty]

Well the rear suspension is done we aired it up for the first time yesterday evening.. 4 link, caliper and brackets, drums, and drop spindles came back from from powder doating they look amazing =) Here is some pics !!
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0490.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0492.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0484.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0494.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0501.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0497.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0486.jpg

Ill post more later as well =)

[LoBeauty]

http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0496.jpg

[DroppedMitsu]

Looking sick, the pink looks awesome too. Keep up the good work.

[pennyman1]

Got ya beat - my whole frame is pink ... lol. Work looks great - waiting for more.

[LoBeauty]

Bed just got body dropped on Saturday and also mounted =)
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0503.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0505.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0509.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0508.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0510.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0512.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0514.jpg
http://i1065.photobucket.com/albums/u392/LoBeauty/IMG_0516.jpg

[Sergio T]

Wow, this things is coming along fine. Can't wait to see the end result. Please keep us posted.

[railinrealities]

looking good

[camoit]

Christ,,,, If you blink, you miss what happened.. This is one fast build thread. Someone is getting help.... Thats cheating,, LOL. I'm pretty sure it's in the rules. Lets look and see...
The rules:
#1 You must own a Mitsubishi.
#2 It must frustrate you with break downs.
#3 You can use a Haynes Manual but it won't have the information you need.
#4 You must work on it in secrete other wise your friends make fun of you.
#5 You must drive it into the grave with you.
#6 You must rebuild it using three times the money it cost new off the lot.
#7 You can only sell it at a loss.
#8 Friends can help you but, they can not confirm or deny the true location or existence of such said truck.
#9 There is a 2 drink minimum when they help.
#10 You must become a member of the MightyRam50 web site to show off your work on things that may, or may not exist.


Hu,,,, how you like that,, Your not cheatiing... Looking good.
Did I miss any??

[Sergio T]

Nope, I think you covered it all.

[LoBeauty]

Not cheating Camoit!!!!!! we honestly are in the garage every minute when we are home to get it ready for this weekend. I have a shit ton more of pics

[LoBeauty]

Takes money to when get it done this fast and I am clean out LOL

[LoBeauty]

3321
Hopefully this uploads =) Ive never used my work computer before to upload

[crvtec90]

Do it girl!

[Fordubishi]

WOOT another pink truck....... Damn nice job and you and your crew pulled it off pretty fast.Of course you're out of money you're building a MM/D50 :P

[DroppedMitsu]

Very clean and sexy truck!! Its looking good, props on all the hard work and how quickly you guys have done it.

[LoBeauty]

Thanks for the compliments, Yeh its taken alot of time and lots of cases of beer LOL.. Putting the rest of it back together in the next couple of days .. I am so excited how beautiful it turned out =)

[Sergio T]

That is awesome! Hopefully I'll get mine back from the shop this weekend. From what I was told, all that's left to do is raise the bed floor.

[LoBeauty]

That was alot of work Sergio alot of things had to be modified .. be patient it is worth it in the end =)

[l.k.]

way to hit it hard and get it done...guys and girl! great work....so whats next?

[pennyman1]

We got to get the forum members together in one place with mag coverage - especially the pink trucks!!! The pink truck from PA in minitruckin used to be on the old forum as bernie lomax but he hasn't come to the new one yet.

[railinrealities]

sweet!

[camoit]

Updates,,,updates pleaseeeeeeee.

[Sergio T]

Updates,,,updates pleaseeeeeeee.

^^^I second that!^^^

[LoBeauty]

36433644ok guys heres some from pics from johnny O from sitti pretti 2012 and if you don't know who that is he is the photographer for mini trucking and street source. I asked him nicely to send me these and I'll share with you all.

[LoBeauty]

and some i've taken myself
36453646364736483649365036513652
theres a few pics on streetsource, asphaltassualt, and a few others. Were hoping we got a background shot in a few of the shows for the magizines. Right now its sitting in the garage awaiting the interior to be fully painted and few odds and ends to get fixed. Enjoy

[irishkael]

looks amazing.

[Sergio T]

Whoa! That's awesome! One question though, what did you do with your muffler? I can't get mine to fit where it use to and now I have to figure something else out.

[LoBeauty]

Muffler is still in stock location and its a smaller muffler I think. It was already done when we got the truck but it didn't have to be changed. We just had to cut it short to run it through the crossmember. So far every show I've taken it too I've taken home a trophy except one show that did top 25. Sunday we got another trophy and even more pics.

[camoit]

Time to toot a horn here. Someone made the Mini Trucker Magazine.
Lets hope she gets back here and finishes up her thread. Congratulations. You go girl......



5798

[LoBeauty]

Thank you :) I was so happy and I have so much to update .. My bed done my custom exhaust done and my dash being done.. I could go on forever.. I am doing alot of work this summer on it and hope to get all the work I've been planning done but a minitruckers truck is never done anyways :)

[BradMph]

Congratulations, and looks to be well deserved! :thumbup:

[pennyman1]

Knew I recognized your truck, but couldn't remember who owned it- you go girl!!!

[LoBeauty]

Hey guys I will have nancy update this thread asap. Truck is down for the winter shes getting alot done before the show season starts. Lets just say motor swap lots of cool sheetmetal work and a new firewall. Plus her interior is gonna get redone professionally and full stereo. She's got tons of pics to upload. She has pulled a trophy or two from every show that truck has attended except two shows. Our trophy wall is full from a show season and a half. Also getting a new tail skin and leds with a possible few bed changes. Dash will be finished and well as changing over to a billet steering column and wheel. Big plans just gotta get started.

[DroppedMitsu]

Awesome, can't wait to see updates

[Uneek98]

Bump for updates?????

[tink]

Wow wow & wow, I just came to the thread looking for headliner ideas since my truck has none at the moment --- and now I need to learn how to WELD! and get some new tools, ha!!!

Most excellent work & awards totally deserved, what an amazing job !!!!!!!

[BradMph]

Wow wow & wow, I just came to the thread looking for headliner ideas since my truck has none at the moment --- and now I need to learn how to WELD! and get some new tools, ha!!!

Most excellent work & awards totally deserved, what an amazing job !!!!!!!



Tink is having a moment everyone,:lmao:. There is nothing better in the world then a girl pulling up next to you and she is driving the same exact truck your driving.

OH WAIT! there is one more thing..."A girl that gets out of her truck and fixes your truck on the side of the road and gets it running again".

That would be a soul mate....:thumbup:

[DroppedMitsu]

She has been workin on this truck, I see updates on the FB mighty max group page. I will try to have her come update her thread. I know she put an old school dash and some other stuff on it.

[t97]

This truck got sold some time ago the shape it is in today is very very sad.. the guy that owns it has an instagram and posts pics of it often.. yoy wouldnt know it was this truck without seeing the interior...

[Salteen]

This truck got sold some time ago the shape it is in today is very very sad.. the guy that owns it has an instagram and posts pics of it often.. yoy wouldnt know it was this truck without seeing the interior...

What's the Instagram username?

[B-Line]

Nice build. Sorry to hear its not being taken care of now.

[LoBeauty]

Hey guys and gals I know its been a long time but we're back! Sold off the pink one and bought another 93 bagged on escalade wheels. Super clean truck and needs small touches. The pink truck a good friend has it and cruises it everywhere. It's on its second motor and transmission. But the suspension and body drop is rock solid to this day.

[LoBeauty]

Just read the previous posts and yes the outside of the pink truck looks rough but it changed hands a few times before it got to my buddy now. The 2 guys it went to before trashed it pretty good and my buddy has no where but outside in OR to work on it. The interior is pretty much the same except the bench seat. He's got his won twist on how he wants it to look. He's the only one that was able to get the brakes to work like they should. I can't remember how to load pics so I can show the new one we got.