g54b rocker arm assembly

[irishkael]

well i have to replace my rocker arm assembly and im having trouble finding anyone that has a stock or aftermarket assembly. does anyone know where i could possibly find one.

[zzion]

Hydraulic or mechanical?

[irishkael]

i think its mechanical

[pennyman1]

If its for an 87, it has hydraulic lash adjusters - all 85 and up mitsus came with them. What happened to the original ones - you break one or more? One trick that the starquest group does with the 2.6 hyd motors is to swap the rockers with rockers from the 3.0 v6 - they are 1.6 ratio for more lift, and they use the same lash adjusters - they also had a roller tip for the cam. They also eliminate the jet valve actuation part of the rocker arm. For best performance, you should replace the cam with one ground for the 1.6 roller rockers - Oregon cam grinders can help you out there.

[irishkael]

idk what happened to it. it just started making noise. so naturally i tried to figure out what was wrong. the first rocker arm was the only one that was bad. so past that i figured it was time to fix it so it wont get worse.

[mxmikie]

i have a set of the roller rocker arms

[irishkael]

thanks but it was just the hydraulic lash adjuster.