Rim&tire?

[Ram50808]

What size rim and tire do I get if I don't want the rim and tire STICKING OUT OF THE FENDER I WANT IT TO BE FLUSH OR A LITTLE BIT IN NOT STICKING OUT.THINKING ABOUT GETTING THESE RIMS http://static.summitracing.com/global/images/prod/large/crr-320-5055_w.jpg

[irishkael]

i think what your needing to know is the offset of the wheel. The offset of a wheel is the distance from its hub mounting surface to the centerline of the wheel. it can be positive, negative, or zero. your offset is at 0. so i would find some wheels that are + or - maybe 2 or 3 and they should work for you no problem. btw that your pic looks, the offset is looks negative and it might stick out on you. (i could be backwards.)

[pennyman1]

The stock rim as a 4 1/2 " offset for the 14 x 6jj steel spoke rims original on the truck. What you need to ask is the back spacing of the rim - less than 4 1/2 means it will stick out further from the hub, more than 4 1/2 it will be further inboard. Rim width also is important - The wider the rim the further it can be from the hub. Positive offset is forward of the centerline, negative is behind the centerline - all measurements for offset are from the back of the wheel relative to the centerline of the wheel. Also, the hole in the center need to be at least 108 mm or 4+" or the wheel or hubs will need to be modified or spacers will need to be used for the wheel fit on the hub - these are wide hole wheels 6 x 5.5 or 6 x 139.7mm.

[Ram50808]

Thanks man that's what I needed to know

[Ram50808]

Just to b sure is this the size I'm looking forU.S. Wheel 97-5760P - U.S. Wheel 97 Series Chrome Modular Wheels

Image is a representation of this part. Actual part may vary.

$70.95


+ Wish List
+ compare
Wheel, Modular, Steel, Chrome, 15 in. x 7 in., 6 x 5.5 in. Bolt Circle, 4.5 in. Backspace, Each
Estimated Ship Date: 7/30/2012


Email
Overview
Suggested Parts
Show All
Large ImageInstructions
Image is a representation of this part. Actual part may vary.

[Ram50808]

http://static.summitracing.com/global/images/prod/large/USW-97-3512_SN.jpg

[Ram50808]

So if I go with a 15x6or7" rim and the back spacing is more then 4 1/2 the rim will not stick out pass the fender?

[91MMY59]

So if I go with a 15x6or7" rim and the back spacing is more then 4 1/2 the rim will not stick out pass the fender?

yes,that is about what my rims are on my truck.15x6 with 4 1/2 inch bs
fit fine

[Ram50808]

Got a pic of your truck?

[DroppedMitsu]

just FYI, as you go up in rim width, ie 6 to 7, then the backspacing and/or offset also needs to go up to compensate for the added width if you plan on not stickig out.

[91MMY59]

here ya go

[Ram50808]

Ok ill post pics once I get my truck going again I actually have the Titan rims for my truck now but don't know what style I want for my truck yet been that the Titan rims are 18" I'm thinking it might look to big that's y I'm thinking of going with like a 15-16" rim so it doesnt look like more rim then truck if u guys know what I mean!if I were bagged then it wouldn't matter.thanks for the help guys.

[91MMY59]

im planning on going 17-18 eventually

[DroppedMitsu]

Check out my truck, I have 18's and am only static dropped, I think they look great personally.

[Ram50808]

Nice truck! I think your truck looks better with the 18's because it's extra cab so to me it fits the overall truck more.I guess it all depends on how low my truck sits once I get the cab and bed back on I'll post some pics. Ive got 2"drop spindles,cut 1 1/2 coils off the front,and 4" blocks with pulled middle leaf in the back.http://static.summitracing.com/global/images/prod/large/USW-97-3512_SN.jpg different truck but those r the rims that I have

[Ram50808]

Sorry wrong pic not those rimshttp://i1184.photobucket.com/albums/z333/parrell456/1986%20Dodge%20D50%20Sport/RHP86D50.jpg

[Ram50808]

Been searching the net and can't find anybody with a d50 or mighty max that has done it in JDM style seen a lot of toyotas and vw caddy trucks but none of our trucks anybody know of any pics or anything on this JDM STYLE it's different but I like it just don't know how our trucks would look!http://t3.gstatic.com/images?q=tbn:ANd9GcRxpOCVTmnPJmlp-x2Kf62ipXGP8s5d6IFznrmDP3nzWLzmW9k8http://t0.gstatic.com/images?q=tbn:ANd9GcRtd9zXt1Q1vQSIYXpoI-fA0Fm6pBZI18CcAz7Nq7VZue6EPaxmnghttp://2.bp.blogspot.com/_kZWPhEN6kvE/TOSY8v-l6XI/AAAAAAAAAOg/47WpEBBr0d0/s1600/minitruck4.jpghttp://t2.gstatic.com/images?q=tbn:ANd9GcRscGYXHcPld1jwUY0QqI1d_CexxKIf5 wpsIdwZ79SCJaC5a8xC just a few pics I'm guessing the rim and tire set up is what makes it THAT JDM STYLE!

[pennyman1]

dead link

[Ram50808]

Sorry I can't get the link to post but I think JDM style is bigger fenders and small and wide rims and tires but not real wide kinda a racey look to um http://www.thedrifttruck.com/Drift%20Truck%20D50/drift%20truck%20007NG.jpgthis the only max/d50 I could fine that's close to a JDM STYLE TRUCK! I like the look of the front rims if it would sit a little more in the fender that would b NICE WITH THAT DEEP STYLE OF RIM!

[Ram50808]

Sorry dead link again

[Sergio T]

Try this one

http://www.thedrifttruck.com/Drift%20Truck%20D50/drift%20truck%20007NG.jpg

[Uneek98]

Try this one

http://www.thedrifttruck.com/Drift%20Truck%20D50/drift%20truck%20007NG.jpg

I want the hood!!!!!!!!

[4doorciv]

Lol at JDM style.

I like mine simple. Nothing too flashy. I'd be happy with titans. If you think it sticks out too far, the 4x4 models have a small fender flare that adds like a half an inch or so. IMO. 5 lug swap opens up more choice of rims. Something like a VIP style Lexus ls400 if that's what you looking for.

[baker4401]

my ram came with these 15's on them can any one tell me if they were offered from the factory or if they are aftermarket ??34253426

[91MMY59]

my ram came with these 15's on them can any one tell me if they were offered from the factory or if they are aftermarket ??34253426

Those are the factory chrome 15's

[baker4401]

kk thanks what yout alls opinons on htem yes no maybe im unsure weather to keep them or up grade to a nice set of aftermarket

[91MMY59]

unless you want to go bigger like 17's or so,i would keep them.They are alot heavier than newer rims so if you want to take some weight off,newer type rims that aren't chrome might be lighter.
We had a set on a silver mighty max that I liked the look of alot.
If the stock look is your thing,keep them.