PDA

View Full Version : 1988 Macroab


Turbo88Max
04-20-2011, 10:52 AM
New to this forum but not Mighty Max's.

Well here's my build thread/restore thread for my 88' Macrocab.

Here's sticky:
1988 Mitsubishi Mighty Max Macrocab 2wd
2.6L truck originally 5 speed originally
S83 paint code with brown interior
147K Miles at time of purchase
No pwr, no cruise, no P/S, no A/C

Drivetrain:
2.6L Turbo swap from an 88' Starion
Big FMIC
Blitz SS BOV
Blaster SS coil
walbro 255lph inline fuel pump
12" Electric fan
open element Air filter
NGK-R plugs
Stage 2 clutch

Suspension:
2" drop spindles
3" drop blocks
middle leaf missing

Wheels n' rubber:
17" Cadillac Escalade rims
245/45R17 Continental's in rear
235/45R17 Pirelli's in front

Misc.:
Boost gauge
Tach
Water Temp gauge


Problems to be addressed for restore:
Body work (mostly Box)
Paint obviously
Interior (was brown, painted black.... horrible, flaking everywhere)
Speakers in dash (stock little 3" was replaced with 4" that don't fit and look like poop)
Needs alignment
Need to go through rear (I don't think it's centered or something.)

I will update with more and more pics as I go and once I'm happy to a point with the exterior or if I start getting a few performance I'll update with my peformance plans.

One plan is 3" stacks 4-5" above the cab.


http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/198953_204785612868069_100000098946212_840090_1522 815_n.jpg
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/200481_204786082868022_100000098946212_840106_2046 507_n.jpg
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/198700_204787112867919_100000098946212_840124_6660 691_n.jpg
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/184329_204786766201287_100000098946212_840116_7416 670_n.jpg
Turbo88Max
04-20-2011, 10:56 AM
Pay no attention to this currently, will put more pictures here.
4doorciv
04-20-2011, 03:08 PM
Welcome to the board. I hopie you can help out other members who are interested in doing the same swap you just did. Your max looks great, interesting choice in mounting the front mount intercooler, and I think yours would be the second max I've seen with that visor on the windshield.
joey_crandall
04-20-2011, 03:53 PM
are you on sqc as well? the prelude in the back is very familliar?
crvtec90
04-20-2011, 04:15 PM
Nice truck man. I like the visor and the side exit exhaust in front of the rear wheel. Did you get slightly different size tires on purpose or did it just end up that way? Just wondering if it helped to tuck them in front or something. Also, did you use the truck trans or the starion and where is the stage 2 clutch from?
LethalEthan
04-20-2011, 04:37 PM
great lookin truck! welcome aboard
turbomax
04-20-2011, 04:39 PM
I like the old school visor.
l.k.
04-20-2011, 07:26 PM
welcome man..nice truck..
you got any videos of the truck performing...
Turbo88Max
04-21-2011, 05:24 AM
Welcome to the board. I hopie you can help out other members who are interested in doing the same swap you just did. Your max looks great, interesting choice in mounting the front mount intercooler, and I think yours would be the second max I've seen with that visor on the windshield.

I personally did not due the swap, the person who swapped the truck sold it and that person destroyed the truck, Because it has such craptastic wiring, didn't run, too many switches, it was in sad shape and I know this because I found the builder's original F/S ad.

I want to get a 93+MM Front bumper cut the center out and mount the intercooler so all of it is in that section since right now those pictures are showing only 5/8's to 3/4 of the intercooler.

I snagged the visor from a MM in my local JY. I was sooo stoked when I saw it I had to have it.


are you on sqc as well? the prelude in the back is very familliar?

86flatvalour... I think your the one who directed me to this site... hahaha


Nice truck man. I like the visor and the side exit exhaust in front of the rear wheel. Did you get slightly different size tires on purpose or did it just end up that way? Just wondering if it helped to tuck them in front or something. Also, did you use the truck trans or the starion and where is the stage 2 clutch from?

The Side exit will be leaving the truck, I want stacks like the drift truck had in this video:
http://www.youtube.com/watch?v=rOkYGNb9wtk&feature=related

Wow you got some good eyes!
Front is 235/45R17
Rear is 245/45R17
The middle owner who ruined the truck never had these rims bored out... so they rub everywhere, I don't have a set of stockers or anything else to throw on, and the truck has never been aligned since the lowering.

Stage 2 clutch I don't know, it grabs good, its the stock trans and it sounds like garbage, the local JY has a 5spd MM with the Hyrdaulic clutch and that same JY HAD a 2.3L Turbo diesel that was just recently crushed...
So I will be installing a Starion trans here soon, with a 6 puk clutch, and I've got a 50 trim turbo that I'll be throwing on.


welcome man..nice truck..
you got any videos of the truck performing...

Sorry no video's but if you go to Carlisle at all I'll be going for performance and Style, either in this or my ACR and I'm going to All-truck nationals as well.
4doorciv
04-21-2011, 01:18 PM
My intercooler looks very similar to yours, but mines is flipped the other way. Instead of pointing down, it's pointing up in other words. That way I still kept the valence intact.
pennyman1
04-22-2011, 08:19 PM
I would be very careful about running a 6 puck clutch pack with a tranny thats not rebuilt. Those clutches grab violently, and will rip a weak tranny apart; hydralic clutch setup won't fix that, and its overkill for a street vehicle. You'll hate it after a week of street driving.
Turbo88Max
04-23-2011, 06:04 AM
Actually I had a 6 puk in a VR-4, yea it was a little hard to get used to but well worth not worrying about slipping a clutch. My Quest trans is fine, nothing wrong with it, I believe it was a low mileage one as well.