1991 isuzu pickup

[LethalEthan]

vehicle
1991 isuzu pickup
2.3L 4zd1
5spd

mods
weber 38 carb
removed all emissions
removed a/c
relocated battery behind passenger seat
Removed carpet
Stripped down dash
catback exhaust (oops there is no cat)
stainless steel brake lines
14in hayden electric fan
Koyo Radiator
5/7 drop maybe more
isuzu amigo fenders
amigo/rodeo bumper and grill combo
custom widened stock valance
Corbeau A4 Driver seat
JDM turboII rx7 passener seat
custom center console
painted dash and door panels
v6 rodeo tach cluster
painted valve cover
custom intake
fake ebay projectors
8k HID headlights
3k HID fogs
stock shorty antenna
pioneer headunit with 4in 2ways in the dash
17in escalade rims with black "inserts"
MSD 6AL box
MSD 2 step rev limiter
MSD Blaster SS coil
NGK Spark plug wires and plugs
Im sure theres more i cant think of at the moment.


future plans
Finish the widebody
WIDE wheels
coilovers front and rear
and a little bit of motor work

http://c4.ac-images.myspacecdn.com/images01/95/l_d9dafc843579f24a151c1df9e4c384cb.jpg

http://c2.ac-images.myspacecdn.com/images01/53/l_470428bd749313811e07317d15957969.jpg

http://c1.ac-images.myspacecdn.com/images01/96/l_ed5b92ac70c5d42694df7e4224238b2c.jpg

http://c1.ac-images.myspacecdn.com/images01/113/l_9644736981cb87f8b9779267fc7edcf4.jpg

http://c1.ac-images.myspacecdn.com/images02/22/l_926153bac7944f2a835730efbf04e04c.jpg

http://c3.ac-images.myspacecdn.com/images02/45/l_0c927ce51e1b40329a92d5d0183828fe.jpg

http://i4.photobucket.com/albums/y147/lethalethan/SSPX0864.jpg

http://img.photobucket.com/albums/v223/teckademics7420/Isuzu/SSPX0701.jpg

http://i4.photobucket.com/albums/y147/lethalethan/100_0738.jpg

http://i4.photobucket.com/albums/y147/lethalethan/100_0726.jpg

http://i4.photobucket.com/albums/y147/lethalethan/SSPX0980.jpg

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1024.jpg

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1025.jpg

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1058.jpg

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1111-1.jpg

http://i4.photobucket.com/albums/y147/lethalethan/DSCI0011.jpg

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1189.jpg

http://i4.photobucket.com/albums/y147/lethalethan/DSCI0089.jpg

http://i4.photobucket.com/albums/y147/lethalethan/DSCI0096.jpg

http://i4.photobucket.com/albums/y147/lethalethan/DSCI0100.jpg

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1270.jpg

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1265.jpg

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1272.jpg?t=1260613381

http://i4.photobucket.com/albums/y147/lethalethan/DSCI0240.jpg

"New shocks went on tonight. Summit sport truck shocks for the front. And Pro Comp Toxic shocks for the back. The summit sport truck shocks ended up being a doetsch tech nitro drop shock with a generic part number. The quality of these is great, they look very well built, but the bottom bushing was far to big to fit into my shock mount. They required a bit of modification but other than that they went right in."

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1310.jpg?t=1261720632

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1315.jpg?t=1261720835

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1446.jpg?t=1268995589

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1451.jpg?t=1269075103

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1453.jpg?t=1269075100

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1481.jpg?t=1269308022

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1498.jpg?t=1270264112

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1521.jpg

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1533.jpg?t=1273607876

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1579.jpg

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1610.jpg?t=1277161590

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1612.jpg?t=1277161590

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1622.jpg?t=1277963076

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1623.jpg?t=1277963076

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1628.jpg?t=1278455929

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1629.jpg?t=1278455928

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1642.jpg?t=1278578693

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1643.jpg?t=1278578693

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1716.jpg?t=1281997983

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1718.jpg?t=1282100020

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1720.jpg?t=1282100020

http://i4.photobucket.com/albums/y147/lethalethan/SSPX1721.jpg?t=1282104217

What the bay used to look like
http://c4.ac-images.myspacecdn.com/images01/60/l_66cba80206e0ad1fc1c2e24e79351ec3.jpg

The interior is going to be swapped out for 97-98 rodeo interior such as this
http://i4.photobucket.com/albums/y147/lethalethan/SSPX5942.jpg?t=1285367610

http://i4.photobucket.com/albums/y147/lethalethan/SSPX5950.jpg?t=1285614903

http://i4.photobucket.com/albums/y147/lethalethan/SSPX5951.jpg?t=1285614904

http://i4.photobucket.com/albums/y147/lethalethan/SSPX5953.jpg?t=1285614905

the caddy wheels are 17x7.5 here you can see just how much room I have to play with the amigo fenders

http://i4.photobucket.com/albums/y147/lethalethan/SSPX5952.jpg?t=1285614904

http://i4.photobucket.com/albums/y147/lethalethan/SSPX5954.jpg?t=1285614907

http://i4.photobucket.com/albums/y147/lethalethan/SSPX5957.jpg?t=1285874719

http://i4.photobucket.com/albums/y147/lethalethan/SSPX5959.jpg?t=1285874720

http://i4.photobucket.com/albums/y147/lethalethan/SSPX5960.jpg?t=1285874721

http://i4.photobucket.com/albums/y147/lethalethan/SSPX5961.jpg?t=1285874720

Hows that for steering angle

[LethalEthan]

if you haven't seen an isuzu pup already with the full amigo conversion, here's what one looks like. This is the right way to do it, most people only put the front fenders on. Also, for some ingenious reason, isuzu decided to make a wider bumper to match the amigo fenders width, but left all their valances the same width. So even on the stock amigo the valance ends about 1.5-2 in before the edge of the bumper, you can see this in the pics below. I couldn't deal with it so we decided to split my stock valance in the middle and add about a 3in section to make up for the extra width.

http://i4.photobucket.com/albums/y147/lethalethan/8594590202_large.jpg?t=1285875147

http://i4.photobucket.com/albums/y147/lethalethan/8594590245_large.jpg?t=1285875147

http://i4.photobucket.com/albums/y147/lethalethan/8594590248_large.jpg?t=1285875149

"Grimace got me a tire for an 18 I'd had for a good while today. Test fit tomorrow. Might switch to these i'm not sure yet. They look really good, but I know they wont be wide enough"

http://i4.photobucket.com/albums/y147/lethalethan/SSPX6002.jpg?t=1288477559

http://i4.photobucket.com/albums/y147/lethalethan/SSPX6003.jpg?t=1288477559

http://i4.photobucket.com/albums/y147/lethalethan/SSPX6004.jpg?t=1288477560

http://i4.photobucket.com/albums/y147/lethalethan/SSPX6010.jpg?t=1288550658

http://i4.photobucket.com/albums/y147/lethalethan/SSPX6011.jpg?t=1288550660

http://i4.photobucket.com/albums/y147/lethalethan/SSPX5995-1.jpg?t=1288550644

http://i4.photobucket.com/albums/y147/lethalethan/SSPX5996-1.jpg?t=1288550644

http://i4.photobucket.com/albums/y147/lethalethan/SSPX6005.jpg?t=1288550644

http://i4.photobucket.com/albums/y147/lethalethan/SSPX6006.jpg?t=1288550646

http://i4.photobucket.com/albums/y147/lethalethan/SSPX6008.jpg?t=1288550647

http://i4.photobucket.com/albums/y147/lethalethan/SSPX6013.jpg?t=1288550677

http://i4.photobucket.com/albums/y147/lethalethan/SSPX6018.jpg?t=1288550671

http://i4.photobucket.com/albums/y147/lethalethan/SAM_0805.jpg?t=1301354780

http://i4.photobucket.com/albums/y147/lethalethan/SAM_0807.jpg?t=1301354780

http://i4.photobucket.com/albums/y147/lethalethan/SAM_0808.jpg?t=1301354780

http://i4.photobucket.com/albums/y147/lethalethan/SAM_0809.jpg?t=1301354780

http://i4.photobucket.com/albums/y147/lethalethan/SAM_0810.jpg?t=1301354780

http://i4.photobucket.com/albums/y147/lethalethan/SAM_0868.jpg?t=1302724098

http://i4.photobucket.com/albums/y147/lethalethan/SAM_0869.jpg?t=1302724098

http://i4.photobucket.com/albums/y147/lethalethan/SAM_0867.jpg?t=1302724098

http://i4.photobucket.com/albums/y147/lethalethan/SAM_0898.jpg?t=1303150866

http://i4.photobucket.com/albums/y147/lethalethan/SAM_0900.jpg?t=1303150866

http://i4.photobucket.com/albums/y147/lethalethan/SAM_0902.jpg?t=1303150866

http://i4.photobucket.com/albums/y147/lethalethan/SAM_0904.jpg?t=1303150866

[foolonthehill]

I like what you're doing. Are you going to use a panel flanger to run around the stock truck bed so the new fenderwells nest to contour properly?

[l.k.]

man that is gonna look sic.. i like the front bumper work and all you did. I am gonna keep up with this. Nice work bro keep it up.

[4doorciv]

Still expecting that turbo to go on that motor. ;)

[crvtec90]

I used to have a red 88....I miss that truck. I sold it to a friend who got t-boned and still drove it to over 200,000 miles. I told him i wanted it back when he had blown it up. I guess he sold it for parts to someone else.

Good lookin truck man. You get the rear fender flares welded on yet? You gonna weld or just panel-bond? I was thinking that I could get the 4x4 fenders from a max to get the wider wheels to tuck under my truck but I guess on mitsu trucks they are just plastic panels that stick out and dont really widen anything.

[LethalEthan]

not sure how i'm going to finish off the quarter panels yet. I like the bare bones rivet look for it but I would have to tie it into the rest of the truck. The bottom body line wont line up unless I change the whole thing due to the amigo being a shorter truck the bottom body line runs at a sharper angle than mine. I'll get it figured out eventually. I just work on it every once in a while when im bored. That bronze block you see in the background behind the pallet its my 2.6L. The motor that the turbo is going on/

[LethalEthan]

btw crvtec I see your in jacksonville. That's only about 2hrs away from me. We came down there a little while ago to buy a crx for my buddy. You ever been to the junkyards up here? Might be worth the trip if you need some parts.

[tgree812]

Sick truck bro!

[l.k.]

Hey Lethal......anything new happening with this ?

[MightyG54BTMax]

Ethan, I have a Calmini header on my 2.3 from my Amigo that Im thinking of putting in the scrap yard lemme know if youd be interested

[LethalEthan]

possibly, I've been looking for one of those for a while ever since calmini stopped making them. Although i'm going turbo it might be worth it to grab it. How much you want for it?

[MightyG54BTMax]

wouldnt be much... the chrome is rusting off. I'll snap some pics of it tomorrow then you could shoot me an offer

[LethalEthan]

sounds good

[LethalEthan]

fresh pics
http://i4.photobucket.com/albums/y147/lethalethan/SAM_1813.jpg

http://i4.photobucket.com/albums/y147/lethalethan/SAM_1819.jpg

http://i4.photobucket.com/albums/y147/lethalethan/SAM_1822.jpg

http://i4.photobucket.com/albums/y147/lethalethan/SAM_1834.jpg

[LethalEthan]

http://i4.photobucket.com/albums/y147/lethalethan/SAM_1882.jpg

http://i4.photobucket.com/albums/y147/lethalethan/SAM_1887.jpg

http://i4.photobucket.com/albums/y147/lethalethan/SAM_1889.jpg

http://i4.photobucket.com/albums/y147/lethalethan/SAM_1884.jpg

http://i4.photobucket.com/albums/y147/lethalethan/SAM_1891.jpg

http://i4.photobucket.com/albums/y147/lethalethan/SAM_1892.jpg

Sorry for the crappy pics, the sun sucks, and she still needs wider wheels......

[pennyman1]

That's cheating, mounting the wheels backward...

[LethalEthan]

it is! but it looks cool sitting in my driveway :grin::grin: I've been looking at diamond steelies as an option. That way I can get whatever size and offset I want. Only thing is, The wheels will need to be so big if I do go steelies they are going to be really really heavy