View Full Version : New guy
rwenzek94
01-13-2013, 11:01 AM
i got my 1989 d50 a couple years ago for 600 bucks. let it sit in the yard a bit until i finally worked on it. rebuilt the entire 2.6 engine. only reused part is the block everything else new or remanned. but noooow im lookin to go bigger tires. i want to put 31's or 32's. i have a 3 inch body lift not sure about the torsion bars or shackles. but im worried about the gearing. i dont want it to be a dog. i would like to go through some rough stuff and im hoping the rest of the truck will take a beating lol. if anyone could help me with some gearing solutions i would really appreciate it. and if you have any ideas on front end lift???
4569
pennyman1
01-13-2013, 05:59 PM
For the gearing you can get 4.22s or 4.63s - not easy to find. There are people on here trying to come up with better torsion bars for the front, and rancho has an add a leaf for 1-2" lift in the rear
rwenzek94
01-13-2013, 08:23 PM
i guess my best bet would be lookin in monteros or raiders? and if i crank the torsion bars up what kind of beating is
rwenzek94
01-13-2013, 08:28 PM
what kind of beatin is my front axles gonna take from the angles? unless someones made a diff drop bracket or something....
82d50gregory
01-13-2013, 11:59 PM
I would not worry about your axles taking a beating as much as you will riding around in it. As for gears go, goto the local pick n pull and find yourself a v6 Mitsubishi montero the should have like a 4.625 ratio and if your lucky a LSD too. And while your at it grab the upper control arms off it and replace them with the oneson your truck for an added 1-2 inches of lift
camoit
01-14-2013, 01:28 AM
Flat Bed,,,,, I like,,,,,
rwenzek94
01-14-2013, 07:58 AM
any year v6 montero would lower gears? and woould it be easier to swap the whole from diff or just the gears? thanks for the reply
rwenzek94
01-14-2013, 07:59 AM
Flat Bed,,,,, I like,,,,,
thanks man gives it a "different" look :)
82d50gregory
01-14-2013, 08:19 PM
Sorry if your truck has a 2.6 than a v6 montero gears and upper control arms won't work they would have to come out of a montero with the 2.6
rwenzek94
01-14-2013, 08:39 PM
so do the 4 cyl monteros have the 4.65 gears? if so how do i know that its the 4.65 gears and not the same gears in my truck already?
82d50gregory
01-14-2013, 08:44 PM
No not all of them have 4.625 gears but they r the most common and you you look at one in the junk yard there should be a sticker in the rear end its self and will tell you. Go out to your truck with a light and look at your pumpkin and see if your sticker is there and then get back to me.....also if there is and orange sticker on the inside of the door jam on the montero or raider then it will have a locking rear end aka LSD
rwenzek94
01-14-2013, 08:53 PM
will do thanks. for the UCAs..i just put them in and crank the tbars or what? not really sure how it goves it lift
82d50gregory
01-14-2013, 08:58 PM
It gives them lift because they are longer than our stock ucas by a few inches. I wouldn't crank up the t bars much unless u want it to ride like a tank
rwenzek94
01-14-2013, 09:00 PM
alrighty well il be on the look for 4 cyl monteros then thanks for the help
ikeepzitclean
01-14-2013, 09:51 PM
welcome to the forum man and hope u enjoy the site.. good luck with the project. nice lookin rig btw :thumbup:
rwenzek94
01-15-2013, 06:39 PM
thank you thank you
92bluemax
01-15-2013, 06:54 PM
welcome to the forum,hope you enjoy the friends and knowledge they have
rwenzek94
01-15-2013, 07:22 PM
thanks, the amount of information on this site has helped me alot during my engine rebuild. the people on here seem great :))
92bluemax
01-16-2013, 08:15 PM
It gives them lift because they are longer than our stock ucas by a few inches. I wouldn't crank up the t bars much unless u want it to ride like a tank
I leveled mine out by cranking up the torsion bars 1 1'2" and your right it rides terrible,mainly because I guess I got stock shocks,instead of extended:shakehead:
rwenzek94
01-16-2013, 09:21 PM
you had montero UCAs and cranks tbars? or just tbars?
92bluemax
01-16-2013, 09:24 PM
Factory t bars
rwenzek94
01-17-2013, 05:47 PM
rides that bad huh? lol
92bluemax
01-17-2013, 05:59 PM
Just like they are no shocks on the front:shakehead: but it does level out the truck .. are y'all getting any of this snow yet ??
rwenzek94
01-17-2013, 06:13 PM
so extended shocks should fix it huuuuh??? and i dont think il be getting snow. still seems a bit warm. prolly about 42*
ikeepzitclean
01-17-2013, 07:59 PM
lol 42 is warm? but then again we're gettin about 35-37* during the day and about 27* at night but never any snow.. just too damn cold as is anyway.
92bluemax
01-17-2013, 09:59 PM
we got around 4" of snow in just a few hrs
ikeepzitclean
01-18-2013, 12:54 AM
we got around 4" of snow in just a few hrs
lol all u guys need power rams out there. the 4x4 will come in handy in that case. :lmao:
rwenzek94
01-18-2013, 07:33 AM
lol 42 is warm? but then again we're gettin about 35-37* during the day and about 27* at night but never any snow.. just too damn cold as is anyway.
warm when ur thinkin about snow lol.
92bluemax
01-19-2013, 06:37 PM
lol all u guys need power rams out there. the 4x4 will come in handy in that case. :lmao:My 92 mm is a 4x4 with a v6:clap:
rwenzek94
01-19-2013, 06:45 PM
mines a 4x4 with 2.6 :/
92bluemax
01-19-2013, 07:03 PM
My Father in law got 14" in southwest Va,now thats snow
Fordubishi
01-19-2013, 07:19 PM
So where's this global warming I keep hearing about and why the hell is it taking so long to get here ;]
ikeepzitclean
01-19-2013, 07:21 PM
So where's this global warming I keep hearing about and why the hell is it taking so long to get here ;]
its all in Cali.. it might take a while to get there :lmao:haha jk
ikeepzitclean
01-19-2013, 07:22 PM
mines a 4x4 with 2.6 :/
what w/ the face? ohhh i know.. if u woulda had a rwd 4 banger that frown would be upside down. haha
92bluemax
01-19-2013, 07:32 PM
Its never too cold to play
rwenzek94
01-19-2013, 08:14 PM
what w/ the face? ohhh i know.. if u woulda had a rwd 4 banger that frown would be upside down. haha
oooh no. 4x4 is a must. just wish i have the 3.0 lol
ikeepzitclean
01-19-2013, 08:37 PM
lol yep. 4x4 can def. come in handy especially deep in da cuts of da backwoods. lol
rwenzek94
01-19-2013, 08:40 PM
yessir. after this engines together lift tires and gears time
92bluemax
01-19-2013, 08:48 PM
I got the 3.0 v6 and I love it:devil:
rwenzek94
01-19-2013, 08:52 PM
:bang:
92bluemax
01-19-2013, 08:57 PM
:bang:Really just be grateful you got a gas saving engine:grin:
rwenzek94
01-19-2013, 09:00 PM
il be really grateful when i find out how some 32s and 4.6 gears do with this 2.6 and the mud :))
92bluemax
01-19-2013, 09:12 PM
It's going to kill your power:shakehead:
82d50gregory
01-19-2013, 09:26 PM
Why would a lower gear ratio kill his power?
92bluemax
01-19-2013, 09:30 PM
He wants a lift and bigger tires also,so that's whats going to rob his power:shakehead:
82d50gregory
01-19-2013, 09:34 PM
He has a 2.6 he should be used to a lack of power;]
92bluemax
01-19-2013, 09:44 PM
:lmao:Thats just wrong, but funny as heck
rwenzek94
01-20-2013, 06:45 AM
:shakehead:
92bluemax
01-20-2013, 07:42 AM
I don't know why they pick on small motors ? they get great gas milage:clap:
rwenzek94
01-20-2013, 07:59 AM
haters gon' hate :thumbup:
92bluemax
01-20-2013, 08:07 AM
I like my engine, but you get an average 10 mpg more than I do:shakehead:
rwenzek94
01-20-2013, 08:14 AM
u have the power tho :rolleyes:
92bluemax
01-20-2013, 08:21 AM
Yeah but I'm a chevy man,so that ain't nowhere near a 350 smallblock
rwenzek94
01-20-2013, 08:23 AM
very true
82d50gregory
01-23-2013, 07:50 PM
OK for everybody wondering. Last night I finally did the gear swap in my truck, I started out with 32 tires and 3.909 gears witch robed a lot of power from my rebuilt 2.6. So I went to the junk yard and found a 1984 montero with a LSD and 4.265 gears and installed them last night. And wow what a difference it made. I was hoping for a little difference and got a lot, it actually put my speedometer back to factory according to my GPS its only 1 MPH difference at 65 MPH and at 75 it runs right around 3200 rpm highly recomended. Oh yea and not to mention I can actually just crawl in 4 low. Hands down must have if going with bigger tires
rwenzek94
01-23-2013, 08:19 PM
:)) man thats great! 4.265 gears and not 4.65? hmm! how easy/difficult was the swap?
82d50gregory
01-23-2013, 10:10 PM
Sorry 4.625 and the swap was really a piece of cake
ikeepzitclean
01-24-2013, 12:03 AM
il be really grateful when i find out how some 32s and 4.6 gears do with this 2.6 and the mud :))
sounds good just dont overdue it. lol but 4.6 gears sound like a plan
ikeepzitclean
01-24-2013, 12:08 AM
OK for everybody wondering. Last night I finally did the gear swap in my truck, I started out with 32 tires and 3.909 gears witch robed a lot of power from my rebuilt 2.6. So I went to the junk yard and found a 1984 montero with a LSD and 4.265 gears and installed them last night. And wow what a difference it made. I was hoping for a little difference and got a lot, it actually put my speedometer back to factory according to my GPS its only 1 MPH difference at 65 MPH and at 75 it runs right around 3200 rpm highly recomended. Oh yea and not to mention I can actually just crawl in 4 low. Hands down must have if going with bigger tires
sounds pretty straight forward and fairly easy DIY w/ the right parts.. what size motor and what kinda tranny u got?
82d50gregory
01-24-2013, 12:11 AM
I have the 2.6 and a 5 speed manual
ikeepzitclean
01-24-2013, 12:52 AM
oh right.. i just realized that u posted it earlier and i missed it. hows ur fuel consumption now?
92bluemax
01-24-2013, 09:08 AM
He now has power and better road speed:clap:
rwenzek94
01-24-2013, 05:27 PM
its a wonderful thing
92bluemax
01-24-2013, 08:29 PM
:clap:
Powered by vBulletin® Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.