Before i go spend a bunch of money for something that might not fit....

[mighty spx]

I cranked up torsion bars on my truck to level the front end to the rear, and trimmed bump stops on the upper control arms to achieve the look i was wanting. but any little bump i hit the uppers hit when the truck comes back up from the bump... and the camber is off the alignment shop got it as close as they could. I have been reading a bunch about first gen montero uppers will correct my camber and the bump stop problem, and they pretty much bolt right on with out and modification to the truck? Am I reading that right? and what year montero should i look for, im going to buy new uppers if it will work out... Thanks for any help..

[itsnotthesizeofthedodge]

Drop the torsion bars back down and get blocks for the front to get it where you want it. Prolly cheaper for that then new uppers just to have your torsion bars maxed out

[camoit]

Any first gen montero. Penyman1 knows the years but there should be a thread with his answers somewhere. I know they covered it.

[mighty spx]

ive seen the threads, but never seen the specific years that would work

[pennyman1]

2nd gen montero 92-96, not montero sport.

[mighty spx]

2nd gen montero 92-96, not montero sport.
^ the answer i was looking for, thanks