PDA

View Full Version : Rear Sway Bar???


claych
10-05-2014, 07:22 PM
Succinctly, Interchange into '88 Ram 50, ???
Thx in advance Honored posters.
royster
10-05-2014, 07:28 PM
My ex-wife has one but she uses it daily. Says a girdle hurts her chest hair.
camoit
10-06-2014, 03:20 PM
There is no rear sway bar that will swap over from what I have seen. But you can add in an after market one. http://www.1speedway.com/
Merrill
10-06-2014, 05:44 PM
Montero Sport rears do. It's not necessarily "direct" (as in bolt-on), but it isn't terribly difficult to install. You just have to weld brackets.
claych
10-07-2014, 06:49 AM
There is no rear sway bar that will swap over from what I have seen. But you can add in an after market one. http://www.1speedway.com/

Humble Thx Sir !!!
claych
10-07-2014, 06:59 AM
Humble Thx Sir !!!

EDIT, SIRS!!!--- MR camoit, & Mr Merrill.
pennyman1
10-07-2014, 06:44 PM
There is a thread on here that someone used a rear sway bar from a late model F-150. Someday I may get around to mounting the one I bought for Geronimo years ago that was supposed to have been made for a 1st gen D-50. When I tried to fish the u-bolt through the frame for the mount, it hit a reinforcement in the box frame that stopped me from mounting it that way. Drilled all the way through from the bottom, but it didn't work right - kept binding. Was going to make plates to mount to axle, just never got around to it yet.
BradMph
10-07-2014, 08:38 PM
http://www.mightyram50.net/phpbb3/viewtopic.php?p=13114


Something about the ford sway bar? In our archives.



crvtec90 wrote:
TurboMax put a rear sway bar from an older F-150 . The rear axle has brackets that wrap around and hold the bar but you have to come up with some way to mount the endlinks to the frame.