View Full Version : I did a dumb thing...
MightyMe
11-23-2014, 01:46 PM
...and removed by distributor without marking the alignment of the rotor. This is on a 1990 with the 2.4 FI engine. What do i need to do to make sure the timing wont be off when i re-install the distributor?
LSR Mike
11-24-2014, 04:49 AM
Put the engine at TDC on the #1 Cylinder (Cam and Crank marks set),put the rotor on the Distributor to point at the #1 Position on the cap (remove the cap and paint a line on the base with white out). install and time the motor according to the manual...
mitchi
11-27-2014, 07:19 AM
^^^^^^what mike said^^^^^^
That's the same engine as mine.
If you're not sure of TDC, pull the no.1 spark plug, and see if you can see the piston.
Easy~~peasy
Powered by vBulletin® Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.