View Full Version : Idle issues on my 88 ram d50 2.6
robertson5347
01-22-2016, 12:22 PM
I cannot adjust down the idle on the stock cab. Lowest it will go is 2200 rpm. Idles pretty smooth. Appears the throttle is closed. What may be the cause. Don't hear any vaccum leaks or any vaccum hoses are off.
camoit
01-22-2016, 02:06 PM
Sounds like the choke keeping it open
geezer101
01-22-2016, 03:00 PM
There's a fast idle screw hidden on the underside of the throttle linkage - if it's wound all the way in there is part of your idle issue. Wind it out a few turns and monitor the idle rpm. You'll need to reset the idle stop adjust screw and the air/fuel mix as well. When all the base settings have been tampered with it takes time to dial it all back in. If the choke butterfly is snapping shut the tensioner spring will need to be adjusted as well. The butterfly should only have a very light load on it.
Powered by vBulletin® Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.