View Full Version : Won't crank or start 85 MM 2.0 manual 2wd
Ealx44
03-21-2016, 06:19 PM
I was spraying starting fluid around to diagnose high pitched noise suspected of being vaccum leak on weber carb, could not pinpoint location, turned off truck came back, no start won't crank no clicking at all. Battery newer and tested, in good shape, good connections. Push start didn't work, Any ideas would be greatly appreciated! Thanks!!
royster
03-21-2016, 06:43 PM
Sounds like a ground issue somewhere.
Ealx44
03-21-2016, 06:47 PM
Ok, good suggestion. I'm new to this vehicle, any idea where to look?
Ealx44
03-21-2016, 06:48 PM
Good suggestion. I'm new to the mighty max, any idea where to start looking?
royster
03-21-2016, 08:16 PM
Sounds like a ground issue somewhere.
I'm trying to remember if these have a ground wire to the manifold. If so, you might have gunked the connection by spraying. This is simply a hunch, and using up time until someone comes along with a decent answer :)
Ealx44
03-21-2016, 09:59 PM
Solved Starter switch at the selonoid loose and fell off. Thanks for your help really appreciate the support.
geezer101
03-21-2016, 11:43 PM
Foiled by a simple issue. Glad you've got it sorted out :)
Ealx44
03-21-2016, 11:55 PM
Thank you, it had me absolutely foiled for a full day, maybe this post will help someone in the future...
Powered by vBulletin® Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.