PDA

View Full Version : Lifter swap question



carpoollane
06-23-2016, 10:50 AM
First off, I'm sorry, I've searched and searched without an answer to this, a friend has a 2.6 in an 88 d50 with a lifter tick, does anyone have a link or info on the 3g or what it is that the lifters will fit, getting rid of the tick?

finalfighter
06-23-2016, 03:50 PM
you could always switch to adjustable ones out of an earlier model they will make some noise but it will be normal. i don't know if a set of 3g lifters will fit. when i did my valve stem seals i went ahead and threw in a set of eBay lifters in. they would tick for a bit of time afterwards but eventually stopped. how loud is the tick? it could be that you are just running the wrong oil in it. try bringing the rpms up a bit say 1500 and see if it goes away. ive been using castrol gtx high mileage 10w30 in my truck and it has almost completely stopped leaking/consuming and does not tick. hope this helps out.

pennyman1
06-23-2016, 06:15 PM
Throw a quart of Rislone in in place of 1 quart of oil on the next oil change - it will clean out the lifters unless they are worn out.