Cross referencing transmissions.

[Beowulf.50Ram]

Will an Isuzu trans fit in our MM I have an 89 or 90 Isuzu I picked up for a 1$ so that I could use the front bumper bucket seats Ana few other things an I was wondering if the transmission will work since it is a hydraulic clutch an I'd like to switch to that anyways? Any an all help is greatly appreciated.

[geezer101]

You can make anything fit anything depending on volume vs money but seeming the Isuzu is a similar design and size you could do a full drivetrain swap. Adapting the transmission to the 4G64 engine will take a lot of messing around though. The biggest issue with converting mechanical to hydraulic clutch is the cable clutch mechanism pulls while the hydraulic pushes. Have a look at how the hydraulic system works on the Isuzu and see if it can give you some clues on how to adapt it.

[BradMph]

If this turns out to fit or needs mods to fit, be sure to post that information for future reference. Valuable Information. :)

[pennyman1]

try projectzero.org or hotrodcoffeeshop.com for more info on tranny swaps to 4g63/64

[Beowulf.50Ram]

Thanks everyone. I knew I was gonna have to swap the whole system if I did. The reason I asked is because I bought it for a dollar an that's cheaper than I can get a montero sport for which has the exact tranny I need.