HALP! Bagged and bodied build on 20s

[shatbox]

Hey, guys! I have been building an '88 Ram 50 for a couple of years. It's bagged on the stock arms with triangulated lower arms with stock steering and drop spindles. It's traditional body dropped 2 1/4" with a side tilt bed. I built the truck to lay on a 25" tall tire.

The problem I have is now I'm trying to fit 20s, the toe is all over the place. Can anyone please send me a link or info on how people have made this work in the past?

I'm looking suggestions on wheel size, custom steering or suspension arm setups. Please HALP!!!

[Salteen]

take it to an alignment shop, if its that bad. if that doesnt work i would check your tie rods, you may have some worn out tie rods. i wouldnt think this, but your knuckle housings might be loose as well. i have soon this ONCE on a bagged 36 chevy sedan converted into a truck.

or really just check for cracked/worn out suspension parts, because if pretty much anything in the suspension is worn out or broken its gonna throw it way outta wack.

[Salteen]

one guy had his rims bored to 108 on a 2wd, it was supposed to be 93, and it wobbled at speed. i would check into that

[davidqheng]

thanks for this post, my problem has been fixed too.