PDA

View Full Version : rubicon build



PowerRam348
01-02-2012, 01:48 PM
here is my base for my rubicon build. i'm using my first 1989 Dodge Power Ram 50. the suspension system that i am going to use is still up in the air right now. 4-wheel independant suspension with 4-wheel steer or 4-link rear and 3-link straight axle in the front. i need idea's.


199519961997199819992000

camoit
01-02-2012, 09:13 PM
If you want to go IFS then look at setting the cab on a Toyota. Plenty of parts to pick from. If you stick with the 50 you are limited to next to nothing. Look at setting the body on something. Then the sky is the limit.

PowerRam348
01-03-2012, 07:31 PM
pennyman had mentioned that i could use a second gen montero front axle for my rear independent. there isn't going to be a body on this rig. tube roll cage, open wheels, open cockpit, and helmets will be required when you ride in it for fear of flying debris.

camoit
01-04-2012, 06:58 PM
A non street rig. Thats not much fun.. Why do you think I'm building mine. So it ca go on the road and off. Besides, who wouldn't want to have a race car on the street.

PowerRam348
01-05-2012, 08:51 PM
no, not a road legal vehicle. my blue truck is for the hot rodding:grin: and towing the... well, i'm not sure what to call it. it'll be a mix of mudder, crawler, and dune buggy. it'll be awesome when its done though that's for sure. i've figured that it will take me at least 18 months to get it done... maybe a little longer:(. i'll get some pictures of the engine that is going to go in this, its a 4.9 liter v8 from a '92 caddy. i've got the whole caddy so i can shanghi all the motor parts and electrical crap that i will need to make this all come together. this is gonna be fun:devil:.

camoit
01-05-2012, 09:51 PM
do you want a set of trailing arms for duel shocks. I have a set that would work on it. They have new uniballs and bushings. They have been used on a race truck for 1 season. They would be just fine on your project. You can check them out when you come down. I have 200 into them.

2031

PowerRam348
01-06-2012, 12:55 AM
i'm still not sure that i'm gonna keep the straight axle though.

PowerRam348
01-08-2012, 11:02 AM
by the way, those are awesome looking trailing arms:thumbup:.