OutcastZeroOne
07-11-2023, 03:50 PM
Hey guys. Im working on a project where I may do an electric conversion of my 83. Issue is I need measurements of a few points for doing up the cad work.
What I need are angles and dimensions of the engine cross member. Mainly of where the bolt on the rubber engine mount is in relation to the other side. From what I was able to roughly measure it looks like the surface is 80° to each other but its hard to verify with my engine in the way. I also need dimensions of the metal engine mount that bolts to the 2.6 block, mainly dimensions between bolt holes.
Any help is greatly appreciated in advance.
What I need are angles and dimensions of the engine cross member. Mainly of where the bolt on the rubber engine mount is in relation to the other side. From what I was able to roughly measure it looks like the surface is 80° to each other but its hard to verify with my engine in the way. I also need dimensions of the metal engine mount that bolts to the 2.6 block, mainly dimensions between bolt holes.
Any help is greatly appreciated in advance.