View Full Version : Carburetor rebuild guide
projectnitro8
08-25-2023, 11:13 AM
Hey everyone, I've had a carb rebuild kit for about a half a year kit and still haven't done anything with it, so I decided to stop struggling and putting it off and reach out. My problem is I have absolutely no idea how to get the stock mikuni off the intake manifold. I tried to follow my Chilton manual and remove the bolts but I honestly don't think that I had the right ones, and of course that's the only step that doesn't have a picture in the manual. Any idea what I need to remove to get the carb off? and possibly where I can find a better manual? (Truck is an 84 with the G63B and stock 2 barrel Mikuni)
xboxrox
08-25-2023, 04:23 PM
Hello nitro, a Mikuni rebuild is quiet the project but you can do it ~ the carb has FIVE hold down bolts the 5th a small short bolt front driver side of carb ~ drain some 1/2 gallon coolant before removing the carb
Check out my threads & photo albums of Mikuni Rebuild
Good Luck ~ George
projectnitro8
08-26-2023, 09:13 PM
Alright, thanks. I'll try it out my next day off
projectnitro8
08-27-2023, 06:56 PM
update, tried to get the carb off today and it turns out the bolts weren't the issue, i took off all the correct ones in the first place. It seems like the carb is stuck down to the manifold.
xboxrox
08-27-2023, 11:12 PM
Big flat blade screwdriver with a twist will get it off SLOWLEY there is at least one spot on the carb with a metal lip big enuff to pri on...
Powered by vBulletin® Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.