<<<<< EDIT >>>>>
You Must be a DONATOR to sell parts on the site.
Please refer to this post for more information.
http://www.mightyram50.net/vbulletin...ming-a-donator
<<<<< EDIT >>>>>
You Must be a DONATOR to sell parts on the site.
Please refer to this post for more information.
http://www.mightyram50.net/vbulletin...ming-a-donator
Last edited by camoit; 04-13-2012 at 03:51 PM.
Here is some pics of the setup in the rear with the 4 link together
Running the exhaust through the cross member like that is awesome, great work! Those are nice wheels too I have one of them on my isuzu.
is your muffler under the cab? or ya going without? Mine is under the bed but i think im moving it to the cab underside...this looks great..keep going..
Payrion: We want it to be as quite as possible in the cab so at this point I am unsure where its going..I think it going in the rear =)
LethalEthan: Thanks it took a while to drill threw the steel and we friedone of my drills .. smoking and everything lol..
the muffler will be fine either way as long as the exhaust dumps outside the body not under the a floor. My first build I just dumped the exhaust after the muffler and at 60-70mph in OD the thing droned like a Mo-Fo under the bed so bad I had to take it out of OD after 10 minutes of driving.My current build the exhaust will dump out the sides of the box just in front of the rear wheels.The mufflers are under the cab floor and are Dynomax Ultra flows and all I hear is the exhaust at the tips.
IMGP0010.jpg Exhausttips.jpg
You Must be a DONATOR to sell parts on the site.
Please refer to this post for more information.
People-banned-for-one-reason-or-another
Donations-Made-and-what-you-get-by-becoming-a-donator
Members come and members go, But the board keeps track of them.
Find me on FaceBook clicking HERE.
Or look on YouTube Click Here.
http://mobilemillwright.com
Yep, i've burned up a drill like that before. Frames dont like it when you try to put holes in them.
Yeh no kidding Lethal =) Tomorrow I am off to replace my mans drill..
Thanks for the information camoit =)
Ohhhh yeah... DROP SPINDLES are HERE =) Time to put those bad boys in
Wow those wheels are REALLY nice! This truck is going to be so boss, can't wait to see the drop spindles on! Great, great stuff!
-RHP
Don't take it personal.Originally Posted by LoBeauty
Donators are like drug dealers. They made the rule, then paid off the cops. You can always join them. We have several ways.
The best is to Upgrade your account by becoming a donator and receive a free Decal.
With all donations of $15.00 you will receive a Small Decal.
For a Donation of $25.00 and up you receive a Large Decal.
http://www.mightyram50.net/vbulletin...ightyRam50-net
We are all waiting for Scarlett to be fitted with one of the 2 he received.
Members come and members go, But the board keeps track of them.
Find me on FaceBook clicking HERE.
Or look on YouTube Click Here.
http://mobilemillwright.com
Yeah ..,my exhaust exits under the bed instead of out from underneath the truck. It gets a ill annoying. Its actually louder riding in the cab then if u stood next to it.
Workin on a body drop right now myself and tryin to decide were to cut on the fire wall at. What made you choose were you did? Had you seen someone else do it right there? Is there ganna be a space issue with the brake booster? Your interior is great for your first time!!! Project is lookin good to. For my tranny cross member I cut the nuts of the back and used a 1/8" or 3/16 in plate with bolts weled flush then just welded 1 1/2' square to it and used stock mounting bracket, then just tighten the nuts down on top of mounts almost like stock but not welded on. Good luck, and keep up the good thjread!
The firewall was planned by staring at it for about an hour or so and figured the cuts we made were the best spot for when the cab fell the sheetmetal would line up the best. As for the steering and brake booster part buy cutting it where we did the booster stayed in the same location as did the steering box hole. Also kept the gas pedal mounts and almost everything important on the drivers side stayed where it needed. However with z'ing the frame for the engine craddle the steering box hole will have to move up the amount of the z but I'll still have space between that and the brake booster. Thats a good idea for the trans member but sense I have to drop the motor the reverse about of the z for the stock hood clearance I'm just gonna fab up an entirely new trans crossmember. I already have the steel for it in the garage.
Here is more pics of progress
The frame is 12" from the ground and can fit a 27" tire
That was how it was in the camo truck. The best description I can give you is that it's just like flying in a Cessna.
Members come and members go, But the board keeps track of them.
Find me on FaceBook clicking HERE.
Or look on YouTube Click Here.
http://mobilemillwright.com
What is the easiest way off dropping or lowering the engine a 1.5"? Also what is the easiest way to z the frame an all this with the body still on the frame and the engine in place? Should we just pull the motor and tranny to do all this? Does anyone have a picture or a link thread that could help?
minitruckin magazine did a mighty max project truck..... i dont think a girl did it.......but im not gonna say a girl cant do it...; lol
I've z mine and have pics but I need a minute to find what file/location there in to share. Yes pull the motor and trany. By z-ing it u raise the motor and can cut the motor mounts off and lower them. I'm lowering mine bout 5/8 but also notched and reinforced the crossmeber. Here is my custom compared to stock.
You could always use spacers between the trany X member and frame. Some DOM tubing and longer bolts.
Members come and members go, But the board keeps track of them.
Find me on FaceBook clicking HERE.
Or look on YouTube Click Here.
http://mobilemillwright.com
Alright more work has been completed =) Enjoy!
Pulled out the motor and tranny for zing the frame
Nice and clean now =)
Tank, compressors and valves mounted
Sealed the cab except for the steering column
Well the rear suspension is done we aired it up for the first time yesterday evening.. 4 link, caliper and brackets, drums, and drop spindles came back from from powder doating they look amazing =) Here is some pics !!
Ill post more later as well =)
Reply With Quote
Bookmarks