-
Need a measurment if anyone can help.
im starting the rear of the truck, got the bed off and took measurments...my rear axle is 1 inch off on the pass side from the driver side.... I measured from the rear of the frame to center of axle, from rear cab mount to center of axle, from cab rear to center, all are 1 inch exactly different....not sure which one to use???? anyone have any info on the frame specs? or if anyone can putt a rear frame to axle measurment...
-
Manual section. first gen. full frame and body measurements. I don't think they got any longer over the years. 112 inch wheelbase.
If you can use a frame hole near the front. Measure in an X pattern.
-
105.1 wheel base. on 2nd gen....the frame is fine, the axle isnt right..no big deal i guess, ill just use the longer number since the axle will pull forward when laying low..
-
Bachelors Degree
Array
im thinking the one leaf spring is sagging and thats why the measurement is off 1 inch......just guessing though
-
ya i dont have too many leafs in there..lol..i set it at the bigger number so when laid out it will pull forward some.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks