Took out my broken,tail hurting bench seat and installed these Integra seats.Have to modify them a little but will work out fine.
newseat2.jpg
Took out my broken,tail hurting bench seat and installed these Integra seats.Have to modify them a little but will work out fine.
newseat2.jpg
Nice!
For reference,the bolt holes line up in front.
Seats sit a tad low but i am 6'2 so they are perfect for me.
inside rear mount will need a ne whole,outside rear mount will need an adapter
of some kind since the rail mount on seat doesn't lay flat.Kinda like an L bracket
and make new hole in floor.
Did a 150 mile test drive today,seats rode great.No back ache like the wore out stock bench
God spoke to 91MMY59 and said, let the modifications begin.
There is no escaping the suction of the, Vortex, commonly known as the Mighty Max............
It's time to yell words of encouragement over the guard rail as another one gets sucked in. Swim, swim, weld, weld, Oops hes gone.
Be sure to start a build thread when you really get going on her. Everyone likes to watch and see pictures of how people do things.
Members come and members go, But the board keeps track of them.
Find me on FaceBook clicking HERE.
Or look on YouTube Click Here.
http://mobilemillwright.com
Can I just use the bench brackets? Will they work on the buckets?
no.buckets have 8 holes,4 for each seat.bench has 4,2 on each sideOriginally Posted by Sergio T
If you have 2 sets of bench seat brackets, then you can use the bench brackets, 1 set per seat.
Pennyman1
The best Dodge that Dodge never made
Living the D-50 lifestyle since 1980
Integra seats sit lower on their factory brackets.I am 6'2 and a big guy so i like the extra room I have.With the factory bench brackets,seat height should be same as the factory seat.
Reply With Quote
Bookmarks