Results 1 to 4 of 4

Thread: 2.6 questions

  1. #1

    Array
    Status
    Offline
    Join Date
    06-17-2012
    Posts
    157
    Location

    Tucson, Az
    Vehicle

    1987 Dodge D-50
    Engine

    G54B

    2.6 questions

    So I have a 88 mighty max and I also have a 87 d50. This is bout the 87. It has the g54b 2.6 with manual trans and 2 piece driveshaft, It at one point (when I owned it the first time 4 years ago) had weber carb now its on my 2.0..it has the balance shaft elimination kit in it and had been rebuilt 4 years ago. Well 4 years ago I traded to a dealership with a cracked block and some dude got it with no title and I bought it from him recently and it was still in my name so I have title...lol...My questions are as follows, How do you guys feel bout fixing a cracked block with JB weld? Also when I was driving it home it got so hot it blew a freeze plug right out the block....no oil or water in block (I didnt check like a dummy i was so happy to buy it for 300) Should I rebuild entire engine? If so what all performance items are available for the 5.4? Also I dont remember it having a 2 piece driveshaft when I owned it the first time, Should I go to a one piece??

    Sorry for the babbling

  2. #2


    Array
    Status
    Offline
    Join Date
    08-31-2011
    Posts
    832
    Location

    Calgary, Alberta, Canada
    Vehicle

    1981 Dodge D-50
    Engine

    Ford V8
    Scrap the block. go find a used one that's running that needs a rebuild and go from there. JB weld is good for some stuff but for block repair its a temporary fix.

    If you're leaving the truck stock hight then you can probably switch to a 1 piece. you will have to check if the suspention will move up or down to much and hit the cross member or the back if the tranny tunnel.

  3. #3

    Array
    Status
    Offline
    Join Date
    06-17-2012
    Posts
    157
    Location

    Tucson, Az
    Vehicle

    1987 Dodge D-50
    Engine

    G54B
    Quote Originally Posted by Fordubishi View Post
    Scrap the block. go find a used one that's running that needs a rebuild and go from there. JB weld is good for some stuff but for block repair its a temporary fix.

    If you're leaving the truck stock hight then you can probably switch to a 1 piece. you will have to check if the suspention will move up or down to much and hit the cross member or the back if the tranny tunnel.
    Its already static dropped and so is my 88 and the 88 has the tunnel cut out

  4. #4




    Array
    Status
    Offline
    Join Date
    03-20-2011
    Posts
    4,857
    Location

    Pittsburgh, PA
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    2wd trucks are 2 piece driveshafts - not an issue unless you drop it severely. you can raise the carrier bearing to correct the driveshaft angle
    Pennyman1
    The best Dodge that Dodge never made
    Living the D-50 lifestyle since 1980

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •