Results 1 to 5 of 5

Thread: wide and narrow km132 tranny internals interchangeable?

Hybrid View

  1. #1

    Array
    Status
    Offline
    Join Date
    08-09-2012
    Posts
    2
    Location

    PacNW
    Vehicle

    1985 Mitsubishi Mighty Max
    Engine

    Please Select Your Engine Type

    wide and narrow km132 tranny internals interchangeable?

    So I know I'm not the first person to ask this (let alone do it), but are the wide km132 internals able to be swapped into a narrow block-transmision case? I know there are differances between mighty max and starion, but what about when they are both mighty max trannys?

    I have a 2.0L 5spd with a bad transmission (noise grindy gears), and a good 5 speed wideblock tranny from an 88 d50. Do i have a useful combination?

    ps. i tried to search for this and couldn't pull up any threads-- if anyone knows of a good one, please feel free to let me know. I also checked projectzerog, but I only found info on switching starion/d50 combos, which is out of my league.

  2. #2




    Array
    Status
    Offline
    Join Date
    03-20-2011
    Posts
    4,857
    Location

    Pittsburgh, PA
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    if they are km132s they may fit, but it depends on the years of both trannies - just like the km144s have different shaft sizes for different years.
    Pennyman1
    The best Dodge that Dodge never made
    Living the D-50 lifestyle since 1980

  3. #3

    Array
    Status
    Offline
    Join Date
    08-09-2012
    Posts
    2
    Location

    PacNW
    Vehicle

    1985 Mitsubishi Mighty Max
    Engine

    Please Select Your Engine Type
    I see, thanks. Mine is from an 85 MM (I'm assuming so far that it's the original tranny in it). The new 5 speed is from an 88 d50. I guess i'll find out if they're swapable guts when i tear them open.

    Thanks!

  4. #4

    Array
    Status
    Offline
    Join Date
    02-26-2013
    Posts
    4
    Location

    bend oregon
    Vehicle

    1987 Mitsubishi Mighty Max
    Engine

    Please Select Your Engine Type
    did you ever check?

  5. #5


    Array
    Status
    Offline
    Join Date
    07-27-2011
    Posts
    263
    Location

    Nyssa, Or
    Vehicle

    1982 Dodge Power Ram 50
    Engine

    G54B
    good question I know going from 145 to 132 will work as matter fact my 145 I rebuilt has a 132 front input shaft, but both of my trannies were wide block. Good luck.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •