That sounds about right. The front door sides on my seats are drilled out and notched a little bit to hit the old seat location. I have large washers on my bolts holding the seat down.
Mine bolted right up, no drilling required.
Are the bolt ups different between first and second gen? I'd love to put buckets in my first gen.
I'm 98% sure the sliders never changed. So it should work. I don't know about the width of the seat.
Members come and members go, But the board keeps track of them.
Find me on FaceBook clicking HERE.
Or look on YouTube Click Here.
http://mobilemillwright.com
I am calling bs on the 95 rodeo seats that shit did not fit anything. Ispent all day yesterday afternoon trying to get them in. what eles might fit in a mighty max.
If there is a direct bolt up ill let you know heading to the junk yark on monday to try out a few more things i saw on other forums
ill let you know
Handismurf, and bobsnewdirection both have the rodeo seats in their pickups ! If you use the sliders off of your bench seats, you will see that they bolt up !! just look under your carpet and you will see the factory holes already drilled for the buckets
They look like they fit pretty good in Bobsnewdirection truck !!!
I tried several times the width was way off. I got the 2 sets of tre rails. I thought they bottled right up. I have a base 89 mm. Nothing lined up.
seats out of a 1991 eclipse, 1997 honda accord seats, and 1998 dodge stratus if anyone has tried these or know. I found them on another forum so i will be heading to the junk yeard tomorrow to see if they work. Ill post pictures of the rodeo seats i tried. Let me know what I did wrong.
I have changed seats in Geronimo so many times over the 32 years I have owned him I lost count. I have used the stock rails, cut the mounts off the stock rails and remounted them to the new seat rails, and made new mounts to adapt the seat tracks to the original mounting holes. He currently has a set of 6 way power seats from a 1991 Dodge Monaco sedan, which was formerly an Eagle Premier. I made new rear brackets and used the front from the original seats, but slotted them to fully line up.
Pennyman1
The best Dodge that Dodge never made
Living the D-50 lifestyle since 1980
Your brackets shipped this morning, estimated delivery on Monday
looks like there's been a lot of trial and error in regards to this.. im curious now. any updates?
You get this done yet?
I just pick up a set of buckets for my truck now when I get some free time I need to install them
022403_2158[00].jpg
Got em for 60 bucks off of CL
I give up !!! I tried again today, and the seats sit too far forward,and my head is 2" from the roof, so i'm just leaving in my bench
Take some pics of your seats, that sounds crazy because I feel like I'm almost on the floor. I can't believe they sit so high.
I used the factory seat rails, and they wont allow it to go back as far as my bench does, i will take some pics this weekend and post them
Bookmarks