Page 1 of 3 123 LastLast
Results 1 to 25 of 64

Thread: New guy

  1. #1

    Array
    Status
    Offline
    Join Date
    01-13-2013
    Posts
    89
    Location

    nj, nj
    Vehicle

    1989 Dodge Power Ram 50
    Engine

    G54B

    New guy

    i got my 1989 d50 a couple years ago for 600 bucks. let it sit in the yard a bit until i finally worked on it. rebuilt the entire 2.6 engine. only reused part is the block everything else new or remanned. but noooow im lookin to go bigger tires. i want to put 31's or 32's. i have a 3 inch body lift not sure about the torsion bars or shackles. but im worried about the gearing. i dont want it to be a dog. i would like to go through some rough stuff and im hoping the rest of the truck will take a beating lol. if anyone could help me with some gearing solutions i would really appreciate it. and if you have any ideas on front end lift???

    121203_0001.jpg

  2. #2




    Array
    Status
    Offline
    Join Date
    03-20-2011
    Posts
    4,857
    Location

    Pittsburgh, PA
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    For the gearing you can get 4.22s or 4.63s - not easy to find. There are people on here trying to come up with better torsion bars for the front, and rancho has an add a leaf for 1-2" lift in the rear
    Pennyman1
    The best Dodge that Dodge never made
    Living the D-50 lifestyle since 1980

  3. #3

    Array
    Status
    Offline
    Join Date
    01-13-2013
    Posts
    89
    Location

    nj, nj
    Vehicle

    1989 Dodge Power Ram 50
    Engine

    G54B
    i guess my best bet would be lookin in monteros or raiders? and if i crank the torsion bars up what kind of beating is

  4. #4

    Array
    Status
    Offline
    Join Date
    01-13-2013
    Posts
    89
    Location

    nj, nj
    Vehicle

    1989 Dodge Power Ram 50
    Engine

    G54B
    what kind of beatin is my front axles gonna take from the angles? unless someones made a diff drop bracket or something....

  5. #5

    Array
    Status
    Offline
    Join Date
    01-13-2013
    Posts
    39
    Location

    la grande oregon
    Vehicle

    1982 Dodge Ram 50
    Engine

    G54B
    I would not worry about your axles taking a beating as much as you will riding around in it. As for gears go, goto the local pick n pull and find yourself a v6 Mitsubishi montero the should have like a 4.625 ratio and if your lucky a LSD too. And while your at it grab the upper control arms off it and replace them with the oneson your truck for an added 1-2 inches of lift

  6. #6



    Array
    Status
    Offline
    Join Date
    03-16-2011
    Posts
    3,819
    Location

    Sacramento, CA
    Vehicle

    1979 Dodge D-50
    Engine

    Chevy V6
    Flat Bed,,,,, I like,,,,,
    Members come and members go, But the board keeps track of them.
    Find me on FaceBook
    clicking HERE.

    Or look on YouTube Click Here.
    http://mobilemillwright.com

  7. #7

    Array
    Status
    Offline
    Join Date
    01-13-2013
    Posts
    89
    Location

    nj, nj
    Vehicle

    1989 Dodge Power Ram 50
    Engine

    G54B
    any year v6 montero would lower gears? and woould it be easier to swap the whole from diff or just the gears? thanks for the reply

  8. #8

    Array
    Status
    Offline
    Join Date
    01-13-2013
    Posts
    89
    Location

    nj, nj
    Vehicle

    1989 Dodge Power Ram 50
    Engine

    G54B
    Quote Originally Posted by camoit View Post
    Flat Bed,,,,, I like,,,,,
    thanks man gives it a "different" look

  9. #9

    Array
    Status
    Offline
    Join Date
    01-13-2013
    Posts
    39
    Location

    la grande oregon
    Vehicle

    1982 Dodge Ram 50
    Engine

    G54B
    Sorry if your truck has a 2.6 than a v6 montero gears and upper control arms won't work they would have to come out of a montero with the 2.6

  10. #10

    Array
    Status
    Offline
    Join Date
    01-13-2013
    Posts
    89
    Location

    nj, nj
    Vehicle

    1989 Dodge Power Ram 50
    Engine

    G54B
    so do the 4 cyl monteros have the 4.65 gears? if so how do i know that its the 4.65 gears and not the same gears in my truck already?

  11. #11

    Array
    Status
    Offline
    Join Date
    01-13-2013
    Posts
    39
    Location

    la grande oregon
    Vehicle

    1982 Dodge Ram 50
    Engine

    G54B
    No not all of them have 4.625 gears but they r the most common and you you look at one in the junk yard there should be a sticker in the rear end its self and will tell you. Go out to your truck with a light and look at your pumpkin and see if your sticker is there and then get back to me.....also if there is and orange sticker on the inside of the door jam on the montero or raider then it will have a locking rear end aka LSD

  12. #12

    Array
    Status
    Offline
    Join Date
    01-13-2013
    Posts
    89
    Location

    nj, nj
    Vehicle

    1989 Dodge Power Ram 50
    Engine

    G54B
    will do thanks. for the UCAs..i just put them in and crank the tbars or what? not really sure how it goves it lift

  13. #13

    Array
    Status
    Offline
    Join Date
    01-13-2013
    Posts
    39
    Location

    la grande oregon
    Vehicle

    1982 Dodge Ram 50
    Engine

    G54B
    It gives them lift because they are longer than our stock ucas by a few inches. I wouldn't crank up the t bars much unless u want it to ride like a tank

  14. #14

    Array
    Status
    Offline
    Join Date
    01-13-2013
    Posts
    89
    Location

    nj, nj
    Vehicle

    1989 Dodge Power Ram 50
    Engine

    G54B
    alrighty well il be on the look for 4 cyl monteros then thanks for the help

  15. #15

    Array
    Status
    Offline
    Join Date
    10-08-2012
    Posts
    371
    Location

    Cali
    Vehicle

    1988 Dodge Ram 50
    Engine

    G63B
    welcome to the forum man and hope u enjoy the site.. good luck with the project. nice lookin rig btw

  16. #16

    Array
    Status
    Offline
    Join Date
    01-13-2013
    Posts
    89
    Location

    nj, nj
    Vehicle

    1989 Dodge Power Ram 50
    Engine

    G54B
    thank you thank you

  17. #17

    Array
    Status
    Offline
    Join Date
    12-03-2012
    Posts
    300
    Location

    Buckingham,VA
    Vehicle

    1992 Mitsubishi Mighty Max
    Engine

    4G67
    welcome to the forum,hope you enjoy the friends and knowledge they have

  18. #18

    Array
    Status
    Offline
    Join Date
    01-13-2013
    Posts
    89
    Location

    nj, nj
    Vehicle

    1989 Dodge Power Ram 50
    Engine

    G54B
    thanks, the amount of information on this site has helped me alot during my engine rebuild. the people on here seem great

  19. #19

    Array
    Status
    Offline
    Join Date
    12-03-2012
    Posts
    300
    Location

    Buckingham,VA
    Vehicle

    1992 Mitsubishi Mighty Max
    Engine

    4G67
    Quote Originally Posted by 82d50gregory View Post
    It gives them lift because they are longer than our stock ucas by a few inches. I wouldn't crank up the t bars much unless u want it to ride like a tank
    I leveled mine out by cranking up the torsion bars 1 1'2" and your right it rides terrible,mainly because I guess I got stock shocks,instead of extended

  20. #20

    Array
    Status
    Offline
    Join Date
    01-13-2013
    Posts
    89
    Location

    nj, nj
    Vehicle

    1989 Dodge Power Ram 50
    Engine

    G54B
    you had montero UCAs and cranks tbars? or just tbars?

  21. #21

    Array
    Status
    Offline
    Join Date
    12-03-2012
    Posts
    300
    Location

    Buckingham,VA
    Vehicle

    1992 Mitsubishi Mighty Max
    Engine

    4G67
    Factory t bars

  22. #22

    Array
    Status
    Offline
    Join Date
    01-13-2013
    Posts
    89
    Location

    nj, nj
    Vehicle

    1989 Dodge Power Ram 50
    Engine

    G54B
    rides that bad huh? lol

  23. #23

    Array
    Status
    Offline
    Join Date
    12-03-2012
    Posts
    300
    Location

    Buckingham,VA
    Vehicle

    1992 Mitsubishi Mighty Max
    Engine

    4G67
    Just like they are no shocks on the front but it does level out the truck .. are y'all getting any of this snow yet ??

  24. #24

    Array
    Status
    Offline
    Join Date
    01-13-2013
    Posts
    89
    Location

    nj, nj
    Vehicle

    1989 Dodge Power Ram 50
    Engine

    G54B
    so extended shocks should fix it huuuuh??? and i dont think il be getting snow. still seems a bit warm. prolly about 42*

  25. #25

    Array
    Status
    Offline
    Join Date
    10-08-2012
    Posts
    371
    Location

    Cali
    Vehicle

    1988 Dodge Ram 50
    Engine

    G63B
    lol 42 is warm? but then again we're gettin about 35-37* during the day and about 27* at night but never any snow.. just too damn cold as is anyway.

Page 1 of 3 123 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •