Anyone know of the dimensions of the cutout in the center console for the 4x4 vs 4x2? are they the same part with a different trim piece or different part all together?
Anyone know of the dimensions of the cutout in the center console for the 4x4 vs 4x2? are they the same part with a different trim piece or different part all together?
What year? I might be able to get some information from my Mitsubishi ASA program. Need 87 or newer.
This is the part number for the retainer ring around gearshift boot for 2WD & 4WD - MA181285
You can plug this number in online in a google search and it will locate the rings and show images somewhere out there for verification.
Animation1.gif
its coming from a 1990 and this is what im talking about, this is for a 4x2 but if i remove the black bezel thing will it fit my 4x4? sorry about the watermark it was the best picture i could find. console.jpg
I see, you don't want to purchase a part and find out it won't fit if I'm correct.
Well, not sure if this helps but here it goes...
These are the 4WD console parts, sorry I have no measurements only parts numbers.
4WD.jpg
These are the 2WD parts. You maybe able to compare part numbers but they show no opening measurements.
2WD.gif
click images to enlarge
awesome, thanks it looks to be the same part
are those parts even available any more?Originally Posted by BradMph
i KNow this is an old thread but we have been talking about center consoles in other threads and this one could use some help.
This perticular center console (picured above in the first few posts) will not work for your 4wd truck, the opening is too small and removing the black plastic trim will not work. you need to get a 4wd console (pictured below) from a second gen. They are VERY hard to find and rare. Good luck.
interior.jpg
20140822_170153.jpg
20140822_175636.jpg
I've got two complete consoles for 2WD trucks. I'll clean them up soon and put them on my store.
i know this is a long shot but do you still have a 2wd center console? i just bought one and it turns out its a 4wd
Where can I find a 4wd center console? My interiors are brown. What's the part number?
I'd build one. Make a shell for it out of stiff cardboard and lay cotton/polyester fleece over it with fiberglass resin. Then you can get interesting with it - custom gauge mount, switch panel, drink holder. As it is I'm toying with the idea of making a custom grill and maybe an engine bay insert. Will be a bit more involved than a console though...
Last edited by geezer101; 10-13-2018 at 07:09 AM.
Do you want to sell the 4x4 console? ThNks
tienes disponible aun la consola central? y necesito otras cosas me podrķas ayudar?
Courtesy of google translate
Reply With Quote
Bookmarks