Doing An Alignment sort of....

[amcervantes]

I put my truck on the alignment machine the other day because the front tires wear on the inside tread pretty fast, I realized that I upper control is mounted to the inside of the frame. So I cant adjust it, should also note that all my suspension and steering bushings and ball joints are shot out. Is possible that the frame is bent or warped?

[Rahtid]

you can adjust with shims, 0309vet_15z+1980_Chevrolet_Corvette+Camber_Shims_A_Arms.jpg 0708tr_04_z+1967_chevy_c10_suspension_install+camber_shims.jpg what alignment machine are you using

[Rickdees]

It's the lower control arm bushings.

[amcervantes]

I don't remember what machine I think it is hunter winalignment something something dark side.... anyways if I shim it, it will only make it worse. So my lower control arm bushing should fix that then. Worth a shot. Thanks man.

[4cylinders]

be sure to get poly proformance type bushings.

[4cylinders]

just an update. energy suspension part number 5-3102g black or 5-3102r red.
real easy to install.