Results 1 to 22 of 22

Thread: Nissan 240sx...truck

  1. #1

    Array
    Status
    Offline
    Join Date
    12-15-2012
    Posts
    73
    Location

    New Mexico
    Vehicle

    1978 Dodge D-50
    Engine

    Chevy V8

    Nissan 240sx...truck

    As a side project, my neighbor and I bought a 240 together to build a drift car. The reason we got a 240 is because it's simply the easiest/cheapest (overall) chassis to build for drifting and I know more about them than most other sport chassis.
    Since we ended up getting the hatchback, we agreed to make it a truck... I just really don't like the hatchback.
    I would post more about what we're going to do to it, but aside from the truck 'conversion' all other decisions are subject to change without notice. lol

    Here's what we started with. Previous owner got run over at an intersection for driving like all the other idiot drivers in Albuquerque. Perfect.
    1381710_710801858948049_501406922_n.jpg 1379849_710801875614714_395036841_n.jpg 1394324_710801895614712_1309382177_n.jpg

    I pulled the front end out most of the way. Still needs some slight tweeking.
    1382184_710802128948022_579541982_n.jpg 1394253_710835305611371_1479448791_n.jpg
    1391936_710802162281352_2059960772_n.jpg 1382205_710835265611375_1735054570_n.jpg

    And now for the fun part. This is what I've got done so far this week. Plenty more to do.

    1464624_725075024187399_1147650589_n.jpg 1453515_725074997520735_1733930879_n.jpg 1471262_725829730778595_79969710_n.jpg 1452028_725856500775918_112308356_n.jpg
    1459895_727880100573558_1793160535_n.jpg 1385804_728621743832727_268473706_n.jpg1452260_728621797166055_2137300547_n.jpg 994389_728621823832719_667337124_n.jpg
    563729_729860083708893_1916629702_n.jpg

  2. #2


    Array
    Status
    Offline
    Join Date
    08-31-2011
    Posts
    832
    Location

    Calgary, Alberta, Canada
    Vehicle

    1981 Dodge D-50
    Engine

    Ford V8
    that's freaking sweet......

  3. #3


    Array
    Status
    Offline
    Join Date
    03-21-2011
    Posts
    767
    Location

    WA
    Vehicle

    1989 Mitsubishi Mighty Max
    Engine

    4G63-T
    We got one or two of thoughs here in Hawaii. Looks really good IMO. I believe he used a Toyota rear window and rear section for the end of the "cab"

  4. #4

    Array
    Status
    Offline
    Join Date
    12-15-2012
    Posts
    73
    Location

    New Mexico
    Vehicle

    1978 Dodge D-50
    Engine

    Chevy V8
    I heard of people using a few truck cab/window sections. I'm leaning towards one of two specific windows though, no truck window for this guy.
    i just need to take a trip to the junkyard with a cordless saw.

  5. #5




    Array
    Status
    Offline
    Join Date
    03-20-2011
    Posts
    4,857
    Location

    Pittsburgh, PA
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    what about the window section from the wagon hatch from a 240sx?
    Pennyman1
    The best Dodge that Dodge never made
    Living the D-50 lifestyle since 1980

  6. #6

    Array
    Status
    Offline
    Join Date
    12-15-2012
    Posts
    73
    Location

    New Mexico
    Vehicle

    1978 Dodge D-50
    Engine

    Chevy V8
    I have no idea what a wagon hatch 240sx is...?

  7. #7

    Array
    Status
    Offline
    Join Date
    03-26-2011
    Posts
    61
    Location

    Montrose, CO
    Vehicle

    1991 Mitsubishi Mighty Max
    Engine

    4G64
    they never made a wagon 240sx sadly, the nissan axxes is the only nissan wagon i can think of from that era and that window is probably too big. i think it would look good with 2 rear windows.

    looks like a good start, that thing is a manual right? i had a auto 240sx, it sucked and to swap a 5 speed you needed everything from the crossmember to the ecu and wiring harness

  8. #8



    Array
    Status
    Offline
    Join Date
    07-24-2012
    Posts
    2,363
    Location

    Washington State
    Vehicle

    1986 Mitsubishi Mighty Max
    Engine

    G63B
    I'm surprised you cut the back off like that when it only had a little doink in the front. Looks like someone took great care of that vehicle and luved it very much. Send them a photo someday to see what a reaction you get.

    As long as the body doesn't freak out by twisting from the support that was removed, your going to have some fun with that car.

  9. #9

    Array
    Status
    Offline
    Join Date
    12-15-2012
    Posts
    73
    Location

    New Mexico
    Vehicle

    1978 Dodge D-50
    Engine

    Chevy V8
    Minimoto- I've done a few 5 speed swaps on s chassis. This one is an auto, but it's getting a different engine and trans anyway.

    Bradmph- haha, that's not the reason I cut it. The previous owner did take care of the engine pretty well, but the rest is questionable. The exhaust is falling apart, interior is garbage, and the front end wasn't the only damage. The doors didn't shut right (prior to cutting). It's all a bunch of little stuff that adds up. It also had a moonroof at one point that was replaced with a half-assed ragtime sunroof. The roof skin is pretty bad, I'm just going to replace it and leave it a solid roof.
    Prior to cutting, I welded braces in between the pillars. Then I moved the section of frame i cut out from the rear of the pillar to the front of the pillar. I didn't get pictures of it so it may not make sense, but in the end, there will be plenty of reinforcement so it will not fall apart.
    Also, I did tell the previous owner our plans and told her I would show it to her or send pictures when it's done.

  10. #10



    Array
    Status
    Offline
    Join Date
    07-24-2012
    Posts
    2,363
    Location

    Washington State
    Vehicle

    1986 Mitsubishi Mighty Max
    Engine

    G63B
    Ahhh very cool then, lol. It just looked pretty nice in them images you posted. The shiny black and chrome, nice rims, all make it look pretty decent. Well, sounds like your headed for fun...don't forget the videos either when you get it rolling.

  11. #11

    Array
    Status
    Offline
    Join Date
    12-15-2012
    Posts
    73
    Location

    New Mexico
    Vehicle

    1978 Dodge D-50
    Engine

    Chevy V8
    Well, no luck finding a del sol or sw20 to cut up and the only Porsche 914 had a smashed rear window, so I defaulted to an 83 toyota pickup window. It's smaller than most other mini truck windows so it was the best choice.
    I built a triangle brace to tie the sides together more and be a frame for the rear wall.
    image.jpg
    image.jpg

  12. #12

    Array
    Status
    Offline
    Join Date
    12-15-2012
    Posts
    73
    Location

    New Mexico
    Vehicle

    1978 Dodge D-50
    Engine

    Chevy V8
    A little more done. My bottle is empty now so I couldn't get very far.

    62331_735866819774886_1943162214_n.jpg 1425682_736944206333814_1044571866_n.jpg 1454662_736944236333811_1796891008_n.jpg

    Took a break between making panels and cut the right side wheel arch and tacked it together.
    1455875_735866843108217_1783434418_n.jpg

  13. #13

    Array
    Status
    Offline
    Join Date
    12-15-2012
    Posts
    73
    Location

    New Mexico
    Vehicle

    1978 Dodge D-50
    Engine

    Chevy V8
    I'd like to give a special thanks to one of your mighty max brethren for donating a piece of itself for this build. lol
    Got half of the bed floor done. The front half will be a hatch with the battery and a misc supply spot.

    1453375_737478996280335_1787139561_n.jpg 1451534_737866052908296_325226861_n.jpg 1471246_738484256179809_256468433_n.jpg

  14. #14

    Array
    Status
    Offline
    Join Date
    12-15-2012
    Posts
    73
    Location

    New Mexico
    Vehicle

    1978 Dodge D-50
    Engine

    Chevy V8
    Last weekend and this weekend;
    Got the front half of the bed made. It will be a hatch with the battery and tool compartment under it.
    Stripped the interior out and mocked up the main hoop for the roll cage and the rear bars.

    1505335_746276785400556_535553130_n.jpg 1526461_746276855400549_751024727_n.jpg 1479124_746276892067212_916757892_n.jpg

  15. #15

    Array
    Status
    Offline
    Join Date
    11-22-2013
    Posts
    76
    Location

    delavan wi
    Vehicle

    1989 Mitsubishi Mighty Max
    Engine

    4G63-T
    very sweet. I have an 89 hatch my self that I have been daily driving for a while. my ka just crapped out on me the other day. I was thinking of doing this build at one point then I got my mm with a 4g63t under the hood and that is enough truck for me. though I do love the look of the 240 truck. what front end are you going to throw on it?

  16. #16

    Array
    Status
    Offline
    Join Date
    05-23-2013
    Posts
    19
    Location

    Seattle, WA
    Vehicle

    1991 Mitsubishi Mighty Max
    Engine

    4G64
    You should put a silvia front end on it

  17. #17

    Array
    Status
    Offline
    Join Date
    12-15-2012
    Posts
    73
    Location

    New Mexico
    Vehicle

    1978 Dodge D-50
    Engine

    Chevy V8
    -thefreack- I'm putting the s14 kouki front on it.

    -mancub- I did consider the 13 silvia front, but I started an s13.4 project while in Okinawa that I never got to finish. Now that I have another s13, I can do both conversions I've been waiting to do.

    Sorry for the lack of updates. I've been busy doing work for other people lately. Just took some leave to try getting this on the road for the first event (march 16). Let's hope it's not wasted leave.

    I would add a bunch of progress pictures, but even after the amount of work I've put in over the last 2 months...doesn't really look very different. lol
    Cage is 80% installed, should be done tomorrow. Fenders, hood and misc suspension parts are on the way. The bed floor is permanently in and the hatch is attached (not the way I originally planned, but it works for now). The front corners inside the bed and the pillars are really what I spent the most time on. and the whole rear section is stitch welded.

    Here's how it sits as of today.

    1908251_784644271563807_376651475_n.jpg

  18. #18

    Array
    Status
    Offline
    Join Date
    03-11-2014
    Posts
    4
    Location

    Belton, SC
    Vehicle

    1988 Dodge Ram 50
    Engine

    I.D.K.?
    That is an extremely bad-ass build you have there, sir. I do hope it proceeds as planned. Awaiting many more pics!

  19. #19

    Array
    Status
    Offline
    Join Date
    12-15-2012
    Posts
    73
    Location

    New Mexico
    Vehicle

    1978 Dodge D-50
    Engine

    Chevy V8
    Thank you.
    It's currently on a short hold, as is the Courier.
    The new house is almost finished so I'm getting the garage cleaned and packed.
    There will be small updates to both threads as I put them together for the move, then it'll be a few months.

    The only thing I've done that hasn't been mentioned yet was this past two weekends.
    We swapped out the auto trans for a 5 speed (still waiting a few small but important parts), installed the coilovers, tension rods, rear upper arms, subframe collars, r32gtr rear sway bar and the clutch/brake pedals. I haven't put it back on the ground yet so ther are no pictures.

  20. #20

    Array
    Status
    Offline
    Join Date
    12-15-2012
    Posts
    73
    Location

    New Mexico
    Vehicle

    1978 Dodge D-50
    Engine

    Chevy V8
    A few quick updates from the past few weeks.

    Cage and gussets all installed.
    1609715_821367727891461_636279776842932722_n.jpg 1513725_821367757891458_4044794898572468133_n.jpg


    A little modification to relocate the window switches to the center dash.
    10262219_821957121165855_8076223633103697812_n.jpg 10247200_825870814107819_1291578611564091863_n.jpg 10320560_825873714107529_1181547259447334753_n.jpg


    Put the body kit molds to use and made the quarter panels (50mm oversize)
    10338253_826401977388036_7743987376632203171_n.jpg 10270315_827550743939826_4845013683425417549_n.jpg 10308166_829805453714355_3839853485566545953_n.jpg

    And after 4 months of waiting, the correct hood finally came in. Test fitted the fenders, hood, headlights and grill. Still a lot of work to be done and brackets to be made.
    10277516_829204907107743_11373679322572276_n.jpg 10157226_829205507107683_2760186351169871651_n.jpg

  21. #21



    Array
    Status
    Offline
    Join Date
    03-26-2011
    Posts
    1,507
    Location

    Vacaville, CA
    Vehicle

    1989 Mitsubishi Mighty Max
    Engine

    4G63-T
    Sweet build bro, this thing is going to be sweet when finished.
    Josh
    09 BMW 335i E92 Twin turbo
    89 Macrocab 4g63 Turbo swapped & Bagged: Build Thread

  22. #22

    Array
    Status
    Offline
    Join Date
    01-08-2015
    Posts
    132
    Location

    Southern California
    Vehicle

    1983 Mitsubishi Mighty Max
    Engine

    G54B
    Updatesssssss!!!!!!!!!!!!!!!!!!

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •