the control arms are stock ....i am gonna triangulate them. i have new bushings that will be picked up tomorrow. Since i am building a new cross member i am gonna have to rebuild/make new mounts for the lower. Instead of having the hole in one side where the lca's mount- I am going to just sandwhich the lca's in between 2 pieces of metallike you would do a 4 link bushing.

I really dont need any help or input anymore....since i spent most of my day working on how to do this and work properly. It was very simple once i found out that the bushings are the same on each side of the control arm and flat as well. My bushings were so destroyed that i couldnt tell a single thing about them.
thanks for the input and info above though i will definitely my add those links to favorites.

Ill be making my own control arms later. i am actually practicing making jigs every once in a while. I have been slowly getting my table made...level stronger, spare plate, tabs, etc,


thanks kenny