Page 2 of 2 FirstFirst 12
Results 26 to 38 of 38

Thread: DSM vs. Evo for RWD Swaps - All the info you need to know

  1. #26

    Array
    Status
    Offline
    Join Date
    11-06-2015
    Posts
    59
    Location

    North Carolina
    Vehicle

    1986 Dodge D-50
    Engine

    G63B
    Here's my first 1st gen swapped truck. You just need room for the CAS to clear. Also the brake booster will have to be moved back an inch to clear the intake manifold.

    5770380810_284c78ec86_z.jpg

  2. #27

    Array
    Status
    Offline
    Join Date
    01-07-2015
    Posts
    4
    Location

    St. Augustine Florida
    Vehicle

    1989 Mitsubishi Mighty Max
    Engine

    G63B
    This is all such great info! My question is what is the clutch setup for a 91 Dem block into 89 truck? There seems to be different options, but what I've gathered is to use the flywheel and pressure plate from the engine with the flywheel machined for the truck pilot bearing. Is this correct? And what clutch disk is preferred? MM? Conquest? Montero?

  3. #28


    Array
    Status
    Offline
    Join Date
    03-21-2011
    Posts
    767
    Location

    WA
    Vehicle

    1989 Mitsubishi Mighty Max
    Engine

    4G63-T
    I'm using a starion clutch replacement. If you want to order one I'd suggest rockauto cause they sell ala cart style to make things easier and the local auto parts stores around me only sell sets. The 87 starion/conquest clutch that measures 8-7/8 inches is the one that fits, not the 88+ Because it measures 9-7/16 inches.

  4. #29

    Array
    Status
    Offline
    Join Date
    07-08-2017
    Posts
    118
    Location

    Cataula , GA
    Vehicle

    1979 Dodge D-50
    Engine

    Other
    This is a super awesome resource. Can it be expanded to add a bit about the automatic transmission option? I know it's not popular but some of us prefer the slushbox. What works?

  5. #30

    Array
    Status
    Offline
    Join Date
    11-06-2015
    Posts
    59
    Location

    North Carolina
    Vehicle

    1986 Dodge D-50
    Engine

    G63B
    Quote Originally Posted by 2nup350 View Post
    This is a super awesome resource. Can it be expanded to add a bit about the automatic transmission option? I know it's not popular but some of us prefer the slushbox. What works?
    The Torquelite Baby 904 3 speed and Aisin Warner found in the 1st Gen Trucks all bolt to the narrow pattern 4G63. The Aisin Warner bell housing can be swap with a 6GXX bell housing found in the early automatic Monteros.

  6. #31

    Array
    Status
    Offline
    Join Date
    04-02-2021
    Posts
    4
    Location

    Cleveland, OK
    Vehicle

    1987 Dodge D-50
    Engine

    G54B
    I've got an 87 D50 automatic. I don't have the engine, but the TF904 is in the engine compartment. What Eclipse engine should I be looking for that would be a direct drop in? What years??

  7. #32

    Array
    Status
    Offline
    Join Date
    06-15-2014
    Posts
    6,059
    Location

    Adelaide, South Australia
    Vehicle

    1985 Mitsubishi L200
    Engine

    G63B
    All FWD engines are narrow block/mounting pattern. You'll need something from a truck or van from the same production/year models as your truck.

  8. #33

    Array
    Status
    Offline
    Join Date
    12-25-2023
    Posts
    3
    Location

    Brownstown, IN
    Vehicle

    1990 Mitsubishi Mighty Max
    Engine

    Other
    Hi, so sorry to revive this thread if it was dead. I’m new to mitsu besides a full size Montero I’ve owned for about a year. I’m doing some trading and the guy is offering an 88 d50 with a “dead” g63b and a manual trans. From the info I’ve gathered in this I can swap any fwd 4Gxx with “drivers side orientation”. Now my questions. What is the “drivers side orientation” and “passenger side orientation”?

  9. #34

    Array
    Status
    Offline
    Join Date
    05-23-2022
    Posts
    71
    Location

    tucson az
    Vehicle

    1986 Mitsubishi Mighty Max
    Engine

    4G61
    Quote Originally Posted by MighTmacs View Post
    Hi, so sorry to revive this thread if it was dead. I’m new to mitsu besides a full size Montero I’ve owned for about a year. I’m doing some trading and the guy is offering an 88 d50 with a “dead” g63b and a manual trans. From the info I’ve gathered in this I can swap any fwd 4Gxx with “drivers side orientation”. Now my questions. What is the “drivers side orientation” and “passenger side orientation”?
    timing belt..a 90-99 with a 4g63t is driverside oriented... the 95 and up dsm with the 420a. ( i think its 2.4l) is pass side oriented along with all evos from around 95 and up.. hope this helps.

  10. #35

    Array
    Status
    Offline
    Join Date
    12-25-2023
    Posts
    3
    Location

    Brownstown, IN
    Vehicle

    1990 Mitsubishi Mighty Max
    Engine

    Other
    Ok whichever side the timing belt is on is the orientation.

  11. #36

    Array
    Status
    Offline
    Join Date
    12-25-2023
    Posts
    3
    Location

    Brownstown, IN
    Vehicle

    1990 Mitsubishi Mighty Max
    Engine

    Other
    Just to be 100% clear.

    this is driver side orientation


    ———————————————————-

    and this is passenger side orientation


    correct?
    Attached Images

  12. #37




    Array
    Status
    Offline
    Join Date
    03-20-2011
    Posts
    4,857
    Location

    Pittsburgh, PA
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    also determines which side the intake and exhaust are, and if they are 6 bolt or 7 bolt flywheel.
    Pennyman1
    The best Dodge that Dodge never made
    Living the D-50 lifestyle since 1980

  13. #38

    Array
    Status
    Offline
    Join Date
    08-02-2023
    Posts
    3
    Location

    Fort Wayne, IN
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G63-T
    What all is required for the dsm head on the evo deck casting? also are the dsm bellhosing 4g64 (from the NT spyder) the same deck casting as the 3rd gen eclipse 4g64?

Page 2 of 2 FirstFirst 12

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •