Finally got everything back together enough to crank it over. Starts right up,but no oil pressure. Does the oil system need to be primed or something? Remanufactured 2.0 g63b long block [Power pro engines] Any help would be greatly apreciated.
Finally got everything back together enough to crank it over. Starts right up,but no oil pressure. Does the oil system need to be primed or something? Remanufactured 2.0 g63b long block [Power pro engines] Any help would be greatly apreciated.
I have seen people pack the oil pump with grease or vasaline to prime the pump. The oil pump drives from the lower balance shart belt; did it slip off? Also be sure you have a good seal from the oil pickup to the pump or it won't draw out of the pan.
Pennyman1
The best Dodge that Dodge never made
Living the D-50 lifestyle since 1980
Look at page 35 of the factory PDF
http://www.mightyram50.net/d-50/Fact.../09_ENGINE.pdf
Last edited by SubGothius; 01-25-2023 at 02:45 PM. Reason: Fixed broken link
Members come and members go, But the board keeps track of them.
Find me on FaceBook clicking HERE.
Or look on YouTube Click Here.
http://mobilemillwright.com
Does it knock and rattle like it has no oil pressure or does the gauge just not read, or light stay on. If the motor sounds smooth it is probably the sensor.
put on a manual oil pressure gage and confirm the problem.
Members come and members go, But the board keeps track of them.
Find me on FaceBook clicking HERE.
Or look on YouTube Click Here.
http://mobilemillwright.com
Reply With Quote
Bookmarks