Results 1 to 10 of 10

Thread: Pulley System

  1. #1

    Array
    Status
    Offline
    Join Date
    03-26-2011
    Posts
    112
    Location

    Rock Hill, SC
    Vehicle

    1995 Mitsubishi Mighty Max
    Engine

    4G64

    Pulley System

    Well as you know the stock pulley systems on a 2.0L & 2.6L are single v-belt. I wondering is there anyway to change it to a flat belt (serpentine) system from a late model eclipse or some kind of car. Are the pulleys interchangeable for all pulleys example the Water pump, Crank, Power Steering, A/C Pump & Idler, and Alternator? or just certain pulleys?

  2. #2



    Array
    Status
    Offline
    Join Date
    03-16-2011
    Posts
    3,814
    Location

    Sacramento, CA
    Vehicle

    1979 Dodge D-50
    Engine

    Chevy V6
    Now that is a good question. I bet there is some way to make it work. You would need to take measurements with a caliper to find the depth of the pulleys and mounting. There must be a way to make it work.
    It would make for a good project. I hope you come up with a complete system with part numbers. What about the AC? You will need to move the compressor slightly to make it align with the rest of the pulleys.
    Members come and members go, But the board keeps track of them.
    Find me on FaceBook
    clicking HERE.

    Or look on YouTube Click Here.
    http://mobilemillwright.com

  3. #3

    Array
    Status
    Offline
    Join Date
    03-26-2011
    Posts
    112
    Location

    Rock Hill, SC
    Vehicle

    1995 Mitsubishi Mighty Max
    Engine

    4G64
    Thanks I will be doing some measuring and whatnot. I would love to see if it can be done. I will give out what info I can to help get this project going and hopefully be successful hehe.

  4. #4


    Array
    Status
    Offline
    Join Date
    08-31-2011
    Posts
    832
    Location

    Calgary, Alberta, Canada
    Vehicle

    1981 Dodge D-50
    Engine

    Ford V8
    I've done conversions like this before and most are a pretty simple swap. Sometimes you have to change the water pump to a slightly longer or shorter neck and make sure what the direction its turning.Water pumps turn either Clockwise or Counter Clockwise depending on the why the belt is run and the cooling system will not work properly if you use the pump in the wrong direction.The other thing is the A/C pump pulley is a pain to change so you're better off getting the pump off a donner car that has the right pulley.

  5. #5

    Array
    Status
    Offline
    Join Date
    12-15-2011
    Posts
    8
    Location

    Qsite az
    Vehicle

    1987 Mitsubishi L200
    use the pulleys from a expo/colt/summit 1992 up

  6. #6

    Array
    Status
    Offline
    Join Date
    09-11-2012
    Posts
    19
    Location

    Sutherlin, OR
    Vehicle

    1989 Dodge Ram 50
    Engine

    G54B
    I'm bumping this old thread because I have always wanted to find aftermarket lightweight pulleys that will fit my 2.0. Tekjones, did you find any results???

  7. #7



    Array
    Status
    Offline
    Join Date
    03-16-2011
    Posts
    3,814
    Location

    Sacramento, CA
    Vehicle

    1979 Dodge D-50
    Engine

    Chevy V6
    Members come and members go, But the board keeps track of them.
    Find me on FaceBook
    clicking HERE.

    Or look on YouTube Click Here.
    http://mobilemillwright.com

  8. #8

    Array
    Status
    Offline
    Join Date
    09-11-2012
    Posts
    19
    Location

    Sutherlin, OR
    Vehicle

    1989 Dodge Ram 50
    Engine

    G54B
    lightweight underdrive or performance pulley's never existed for us. I'm wondering if there is a match out there somewhere from for another 2.0 engine.

  9. #9

    Array
    Status
    Offline
    Join Date
    09-11-2012
    Posts
    19
    Location

    Sutherlin, OR
    Vehicle

    1989 Dodge Ram 50
    Engine

    G54B
    Still wondering about light weight crank pulley options. By the way, Im replying to my old account, that I couldnt get re-activated. https://www.ebay.com/itm/29583728320...SABEgLur_D_BwE

  10. #10

    Array
    Status
    Offline
    Join Date
    09-11-2012
    Posts
    19
    Location

    Sutherlin, OR
    Vehicle

    1989 Dodge Ram 50
    Engine

    G54B
    nevrmind, my old account was. Just noticed.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •