Results 1 to 3 of 3

Thread: Cluster lights mystery

Hybrid View

  1. #1

    Array
    Status
    Offline
    Join Date
    08-31-2022
    Posts
    28
    Location

    Minnesota
    Vehicle

    1986 Dodge Ram 50
    Engine

    4G63

    Cluster lights mystery

    Howdy all - Looking for some brainstorming help with my 86 2.0.

    I'm having an intermittent issue with the warning lights in the cluster - turning the key to the on position, I'll get the seatbelt chime and light, but no other lights (battery/oil/egr/etc). After starting the truck, I'll have a faint glow from the charge indicator light.

    Sometimes, turning the key on, everything works as expected (warning lights come on, then go away when the engine starts, etc).

    Truck starts and drives great.

    Alternator is working fine (seeing 14+ volts when running). Everywhere I've tested voltage with the key off looks good - 12.75v or so. I'm assuming there's a voltage drop somewhere prior to the cluster though. I'm just stumped on the intermittency. I've replaced all the fuses and cleaned the fuse folders, plus any other connectors I can access. I can't seem to make the condition change with any wire wiggling.

    Any suggestions on where to look from here?

  2. #2

    Array
    Status
    Offline
    Join Date
    08-31-2022
    Posts
    28
    Location

    Minnesota
    Vehicle

    1986 Dodge Ram 50
    Engine

    4G63
    Update: discovered that if I give the dash a good thwack right above the cluster, the problem goes away. Thoughts?

  3. #3

    Array
    Status
    Offline
    Join Date
    06-15-2014
    Posts
    6,059
    Location

    Adelaide, South Australia
    Vehicle

    1985 Mitsubishi L200
    Engine

    G63B
    It will either be one of the harness sockets going into the back of the cluster or the circuit board on the cluster is suspect.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •